Amana Tool

Boring & Drilling Bits: Forstner Bits: 3/4" Dia x 3/8" ShankApplication: Drill pocket-holes, flat-bottom holes*, etc., using any 3/8" or larger...

Solid Surface Router Bits: Undermount Bowl Router Bits, Carbide Tipped: 2-1/4" Dia x 1-1/4" x 18° x 1/2" ShankThese bits prepare and/or finish coun...

Solid Surface Router Bits: Corner Rounding Router Bits, Carbide Tipped with Ultra-Glide Ball Bearing Guide: 1-1/8" Dia x 1/2" x 5/16" Rad x 1/2" Sh...

Solid Surface Router Bits: Round Under Router Bits, Carbide Tipped with Ultra-Glide Ball Bearing Guide: 10° x 3/4" Dia x 1" x 1/2" ShankTrim a sink...

Solid Surface Router Bits: Round Under Router Bits, Carbide Tipped: 1/2" Rad x 2-1/8" Dia x 3/4" x 1/2" ShankRound the lower edge of a counter with...

Solid Surface Router Bits: Countertop No-Drip Router Bits, Carbide Tipped with Ultra-Glide Radius Bearing Guide: 5/16" Rad x 1" Dia x 1-1/8" x 1/2"...

Solid Surface Router Bits: Countertop No-Drip Router Bits, Carbide Tipped with Ultra-Glide Radius Bearing Guide: 5/16" Rad x 1" Dia x 7/8" x 1/2" S...

Solid Surface Router Bits: Face Inlay Router Bits, Carbide Tipped: 7/8" Dia x 1/2" x 1/2" ShankStandard Equipment:57106 Solid Surface Face Inlay Ro...

Router Bit Sets: Carbide Tipped, 1/4" ShankStandard Equipment: 49400 Chamfer 45 Deg x 1-1/4" Router Bit 49512 Corner Round 3/8" Rad x 1-1/4" Dia Ro...

Router Bit Sets: Doormaking Router Bits, Carbide Tipped, 1/2" ShankStandard Equipment: 54121 Ogee Raised Panel Router Bit 55430 Ogee 2-Piece Stile ...

Architectural Router Bits: Crown Molding Router Bits, Carbide Tipped: 3/16" x 7/16" Rad x 1-1/4" Dia x 2-1/4" x 1/2" ShankProduce mid-sized crown, ...

Grooving Router Bits: Round Over Groove Router Bits, Carbide Tipped: 1/4" Rad x 3/4" Dia x 1/2" x 1/2" ShankThis bit creates a flat-bottom groove b...

Grooving Router Bits: Rip & Slotting Router Bits, Carbide Tipped: 1/4" Dia x 5/16" x 1/4" ShankUse this bit for cutting sheets of laminate, pan...

Architectural Router Bits: Architectural Molding Router Bits, Carbide Tipped: 1/8" x 3/32" x 1/4" x 7/16" x Rad x 1-3/8" Dia x 1-5/8" x 1/2" ShankT...

Architectural Router Bits: Multi-Form Router Bits, Carbide Tipped: 2-1/4" Dia x 1-7/8" x 1/2" ShankThis one bit is designed to cut more than 40 dif...

Profiling Router Bits: Handrail Router Bits, Carbide Tipped: 1/8" x 19/32" Rad x 1-3/8" Dia x 1-1/2" x 1/2" ShankShape the sides of a handrail to m...

Profiling Router Bits: Handrail Router Bits, Carbide Tipped: 1/8" x 1/2" Rad x 1-1/4" Dia x 1-1/2" x 1/2" ShankShape the sides of a handrail to mak...

Profiling Router Bits: Triple Beading & Fluting Router Bits, Carbide Tipped: 1/8" Rad x 7/8" Dia x 1" x 1/2" ShankThree uniform beads or flutes...

Profiling Router Bits: Triple Beading & Fluting Router Bits, Carbide Tipped: 1/8" Rad x 7/8" Dia x 1" x 1/4" ShankThree uniform beads or flutes...

Profiling Router Bits: Triple Beading & Fluting Router Bits, Carbide Tipped: 1/8" Rad x 7/8" Dia x 1" x 1/2" ShankThree uniform beads or flutes...

Profiling Router Bits: Matched Bead Router Bits, Carbide Tipped: 3/16" Rad x 1-1/4" Dia x 1" x 1/2" ShankThis dual purpose bit produces both moldin...

Profiling Router Bits: Edge Fluting Router Bits, Carbide Tipped: 1/8" Rad x 3/4" Dia x 1/4" x 1/4" ShankCut individual flutes - shallow, small-radi...

Profiling Router Bits: Edge Fluting Router Bits, Carbide Tipped: 5/16" Rad x 3/4" Dia x 1/2" x 1/2" ShankThis bit produces a fingernail flute, rath...

Profiling Router Bits: Classical Cove & Bead Router Bits, Carbide Tipped: 3/8" x 3/8" Rad x 2" Dia x 1" x 1/2" ShankThe positions of the bead a...

Profiling Router Bits: Classical Cove & Bead Router Bits, Carbide Tipped: 3/16" x 5/16" Rad x 1-1/2" Dia x 5/8" x 1/2" ShankThe positions of th...

Profiling Router Bits: Classical Cove & Bead Router Bits, Carbide Tipped: 1/4" x 3/16" Rad x 1-3/8" Dia x 11/16" x 1/4" ShankThe positions of t...

Door Making Router Bits: Ogee Router Bits, Carbide Tipped: 3/8" Rad x 2-1/4" Dia x 15/16" x 1/2" ShankThis bit produces an undulating curve with tw...

Door Making Router Bits: Ogee Router Bits, Carbide Tipped: 5/32" Rad x 1-3/8" Dia x 1/2" x 1/2" ShankThis ogee pattern has a step at the end of the...

Door Making Router Bits: Ogee Router Bits, Carbide Tipped: 5/32" Rad x 1-3/8" Dia x 1/2" x 1/4" ShankThis ogee pattern has a step at the end of the...

Door Making Router Bits: Ogee Router Bits, Carbide Tipped: 1/4" x 3/16" Rad x 1-3/8" Dia x 11/16" x 1/4" ShankThe ogee is one of the basic shapes u...

Door Making Router Bits: Vertical Raised Panel Router Bits, Carbide Tipped: 15° x 1-1/8" Dia x 1-5/8" x 1/2" ShankRaised panels with a low-horsepow...

Door Making Router Bits: Vertical Raised Panel Router Bits, Carbide Tipped: 7/8" Rad x 1-3/16" Dia x 1-5/8" x 1/2" ShankRaised panels with a low-ho...

Door Making Router Bits: Vertical Raised Panel Router Bits, Carbide Tipped: 7/8" Rad x 1-3/16" Dia x 1-5/8" x 1/2" ShankRaised panels with a low-ho...

Door Making Router Bits: Vertical Raised Panel Router Bits, Carbide Tipped: 1-9/16" Rad x 1-1/8" Dia x 1-5/8" x 1/2" ShankRaised panels with a low-...

Door Making Router Bits: Raised Panel Router Bits with Back Cutter, Carbide Tipped: 7/8" Rad x 3-3/8" Dia x 1-1/16" x 1/2" ShankRaised panels fit s...

Door Making Router Bits: Raised Panel Router Bits, Carbide Tipped: 3/4" Rad x 2-5/8" Dia x 5/8" x 1/2" ShankCreate raised panels for cabinet doors,...

Door Making Router Bits: Raised Panel Router Bits, Carbide Tipped: 25° x 1-5/8" Dia x 1/2" x 1/2" ShankCreate raised panels for cabinet doors, fram...

Door Making Router Bits: Raised Panel Router Bits with Back Cutter, Carbide Tipped: 1-9/16" Rad x 3-3/8" Dia x 1-1/16" x 1/2" ShankCreate raised pa...

Door Making Router Bits: Raised Panel Router Bits, Carbide Tipped: 7/8" Rad x 3-3/8" Dia x 9/16" x 1/2" ShankCreate raised panels for cabinet doors...

Door Making Router Bits: Raised Panel Router Bits, Carbide Tipped: 1-9/16" Rad x 3-3/8" Dia x 1/2" x 1/2" ShankCreate raised panels for cabinet doo...

Door Making Router Bits: Finger Grip & Door Lip Router Bits, Carbide Tipped: 3/8" Rad x 10° x 1-9/16" Dia x 1" x 1/2" ShankMill the edges of do...

Door Making Router Bits: Finger Grip & Door Lip Router Bits, Carbide Tipped: 1/4" x 3/16" Rad x 2" Dia x 1-1/4" x 1/2" ShankProduce clean, mode...

Door Making Router Bits: Finger Grip & Door Lip Router Bits, Carbide Tipped: 5/64" x 15/64" Rad x 1-1/2" Dia x 13/16" x 1/2" ShankProduce clean...

Signmaking Router Bits: V-Groove Router Bits, Solid Carbide: 1/4" Dia x 3/8" x 1/4" ShankRout fine-line V-Grooves in laminate-covered and wooden su...

Straight Plunge Router Bits: High Production Router Bits, Carbide Tipped: 7/32" Dia x 3/4" x 1/4" ShankUse a two-flute bit where fine finish is par...

Straight Plunge Router Bits: Stagger Tooth Panel Pilot Router Bits, Carbide Tipped: 1/2" Dia x 2-1/2" x 1/2" ShankTwo cutting edges spaced 180 degr...

Straight Plunge Router Bits: Stagger Tooth Panel Pilot Router Bits, Carbide Tipped: 1/2" Dia x 1-1/2" x 1/2" ShankTwo cutting edges spaced 180 degr...

Trimming Router Bits: Hole and Flush Cut Router Bits, Solid Carbide: 1/4" Dia x 1/4" x 1/4" ShankThis bit is used where laminate is applied over pr...