Metabo HPT KNR83A5SM Framing Nailer / Impact Driver Pro Combo Kit

21° Plastic Collated Framing Nailer & Bonus Impact Driver Kit

The 3-1/4 Inch Plastic Collated Framing Nailer (NR83A5) has the same legendary durability and reliability you have come to trust with Metabo HPT, but now with an improved trigger design and sharing all the same motor parts as the original NR83A. With the power to drive 2" to 3-1/4" nails into even the toughest materials there is no job this tool canÕt handle. With the selective actuation now on the trigger we not only reduced the total number of parts in the trigger but also eliminated all composite parts.

Also included in this pro combo kit is the Metabo HPT 18V MultiVolt Cordless Triple Hammer BOLT Impact Driver model (WH18DCQ4). This next generation of cordless impacts, providing an innovative solution to make any jobsite even more productive! By incorporating a third anvil and now 5 speed settings including the powerful BOLT mode that efficiently tightens and loosens large bolts and nuts, it can achieve a high torque of 1,859 in-lbs, an impressive 4,000 BPM, and a faster driving speed of 3,700 RPM, while also reducing vibration.

Standard Equipment:

• (1) 3-1/4" Full Round-Head, 21° Framing Nailer (NR83A5)
• (1) 18V MultiVolt Triple Hammer Bolt Impact Driver (WH18DCQ4)
• (1) 18V / 36V MultiVolt 5.0Ah Water & Dust Resistant Battery (380083M)
• (1) 18V Charger (UC18YKSL)

Specifications:

Coil Framing Nailer

• Nail Type: Full Round-Head, 21° Plastic Ribbon Collated
• Nail Gauge: .113, .120, .131
• Range: 2"- 3-1/4" Smooth or Ring
• Magazine Capacity: 64 to 70 Nails
• Operating Pressure: 70-120 psi
• Air Inlet Type: 3/8" NPT
• LxH: 21-3/16"x 13-3/8"
• Weight: 8.8 lbs

18V Impact Driver

• Tool Rating: 18 Volt & 18V/36V MultiVolt
• Drive: 1/4" Hex
• Torque: 1,859 in-Ibs
• No-load RPM: 0 to 3,700
• No-load BPM: 0 to 4,000
• Clutch Settings: 15
• Weight: 2.0 lbs

Features:

Coil Roofing Nailer

• TECHNOLOGY: Experience quick response and rapid, powerful driving with the Metabo HPT cylinder valve drive mechanism
• AWARD: Rated the Pro Preferred Nailer for 9 years running (2014 - 2022) by Builder and Developer Magazine
• TRIGGER: Selectable trigger mode; choose contact or single sequential actuation mode via switch in the trigger
• RAFTER HOOK: Can be positioned on left or right side depending on user preference
• EASY LOAD: Rear loading magazine for quick replenishment
• MAGAZINE: 2-Piece magazine for durability and replacement ease
• GUARANTEE: 30-Day guarantee
• RUBBER GRIP: Provides for superior control and comfort during use
• CLAW TIP: Hardened claw tip resists wear and grips wood for driving nails at different angles
• OPEN NOSE: Open nose design for easy extraction should a nail jam
• RECOMMENDED: Use Metabo HPT Nails for best results
• WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty

18V Impact Driver

• Power: Up to 1,859 in-lbs of torque, 0-3,700 RPM, and 0-4,000 BPM
• Ultra-Compact Size & Weight: Only 4-1/2Ó in length and 2.0 lbs
• 5 Speed Modes: For ultimate control while fastening screws and bolts
• Triple Led Light: Superior visibility while minimizing shadows
• Water & Dust Resistant: With IP56 Rating
• Triple Hammer Technology: Experience faster driving speed, more torque, and decreased vibration
• Trigger: Responsive variable speed trigger provides complete control during operations
• Motor: Powerful brushless motor technology provides longer run-time, increased power, and extended durability with essentially no maintenance
• Accepts: Any 18V battery and 18V/36V MultiVolt battery from Metabo HPT

18V / 36V MultiVolt Battery

• Amp Hours: 5.0Ah on 18V tools & 2.5Ah on 36V tools
• Water Resistant: Thanks to an internal membrane and twin exit ports for water that gets inside the battery pack
• Impact Resistant: Added protection against damage from drops
• 4-Stage Fuel Gauge: On battery power indicator gauge for convenience
• Technology: Over-load, over-charge, and over-discharge protection technology
• Temperature: Operates in temperatures as low as 14°F (-10°C)
• Powers: All Metabo HPT 18V and 36V tools

18V Charger

• Application: Charges Metabo HPT 18V and 18V/36V MultiVolt slide type Lithium Ion batteries
• Protection: Multiplex Protection circuit in the battery, communicates with the charger preventing the battery from over-charge to improve safety and ensure a long battery lifetime
• Light Indicator: Charger uses color light indicator to clearly indicate if the battery is charged