Powermatic 719T Mortiser - 1791264K

1HP 1PH 115/230V

The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP motor for the most demanding jobs. The head is mounted using adjustable gibs to assure years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-loaded six position adjustable handle for movement. A handy depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35 degrees. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides plenty of work-holding force and will swivel to accommodate angled workpieces. The heavy enclosed steel cabinet provides plenty of storage inside for chisels and accessories.

Powermatic 719T Mortiser, 1791264k

Standard Equipment:

  • 719T Mortiser - 1791264K
  • Chisel & Tool Holder
  • 1/2-in Drill Chuck
  • 4-in Chuck Key
  • Removable Safety Switch Key

For pricing and availability call us toll free at 877-551-8665.

PART#: 1791264K


  • Chisel Capacity: 1/4" to 1"
  • Chisel Center to Fence: 4"
  • Chisel Shank Capacity: 5/8", 3/4", 1-1/8"
  • Chisel Stroke: 10-3/4"
  • Bushing Size: 5/8", 3/4", 1-1/8"
  • Chuck Size: 1/2"
  • Spindle Speed: 1,725 RPM
  • Table Size (L x W): 7" x 20-1/4"
  • Table Tilt: 0 - 35 Degrees
  • Table Travel - Cross: 4"
  • Table Travel - Longitudinal: 15-1/2"
  • Fence Size (L x H): 4-1/2 "x 20-1/4"
  • Base Size: 14 x 16"
  • Motor Power (HP): 1 HP
  • Motor Phase: 1
  • Motor Voltage: 115V, 230V
  • Prewired Voltage: 115V
  • Motor Current: 11A, 5-1/2A


  • Sturdy cast iron construction with precision-machined column and table.
  • Quick position table mounted swiveling vise clamp accommodates angled work pieces.
  • Feed lever features size positions allowing for quick adjustments.
  • Table and fence tilt from 0 to 35° for angled mortises.
  • Gas cylinder controlled rack and pinion system for smooth head raising and lowering.
  • Hinged chuck door allows easy access for quick bit changes.
  • Quick adjust depth stop for uniform mortise depths.
  • Provided 5/8", 3/4" and 1-1/8" bushings allow multiple chisel shank sizes.
  • Handwheels control smooth linear and cross table motions.
  • Adjustable work stop for repeat cuts.

Hot Tool Deals!!!

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $22.50

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.


100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.




Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools