Powermatic PWBS-14CS Bandsaw - 1791216K

14", 1-1/2 HP

This PWBS-14CS Band Saw has an extra-large, two-piece cast-iron table. It consists of a 15-in x 15-in tilting section and a fixed 15-in x 5-in extension for a total working surface area of 15-in x 20-in. A balanced, nine spoke cast-iron wheel makes for smooth blade travel, and a CARTER quick tension release lever makes blade changing easy. A micro-adjustable dual bearing blade guide system is featured above and below the table. A work lamp and chip blower improves the working conditions around the saw. A Poly-V belt maximizes power transmission while minimizing noise and vibration. The saw has a full 6-in under-guide capacity with a 13-1/2-in frame-to-blade clearance.

Powermatic PWBS-14CS Bandsaw, 1791216K

Standard Equipment:

  • PWBS-14CS Bandsaw - 1791216K
  • CARTER Quick Tension Release
  • Adjustable Miter Gauge
  • T-Style Rip Fence with Resaw Assembly
  • 1/4-in Band Saw Blade
  • Gooseneck Work Light
  • Chip Blower
  • 1791217 - Riser Block

For pricing and availability call us toll free at 877-551-8665.

PART#: 1791216K


  • Band Saw Size/Wheel Diameter: 14"
  • Cutting Capacity Width: 13-1/2"
  • Cutting Capacity Height: 6"
  • Blade Length: 93-1/2"
  • Blade Speed: 3,000 SFPM
  • Table Size (L x W): 15" x 15"
  • Table w/Extension (L x W): 15"x20-1/2"
  • Table Height from Floor: 44"
  • Maximum Saw Blade Width: 3/4"
  • Minimum Saw Blade Width: 1/8"
  • Table Tilt: 10° Left, 45° Right
  • Dust Port Outside Diameter: 4"
  • Motor Power: 1-1/2 HP
  • Motor Phase: Single
  • Motor Voltage: 115V, 230V
  • Prewired Voltage: 115V
  • Motor Current: 11A, 5-1/2A
  • Weight: 203 lbs


  • CARTER quick-tension release lever with full tension and blade release levels.
  • With a powerful 1-1/2 HP TEFC motor and a wide Poly-V belt, full power is transferred from the motor to the drive wheel.
  • Features a durable micro-adjustable dual bearing blade guide system above and below the table.
  • Extra-large, two-piece cast-iron table consists of a 15-in x 20-7/8-in tilting (45 degrees right and 10 degrees left) section and a fixed 15-in x 5-in extension for a total working surface of 15-in x 20-in.
  • Exclusive design, quick-release precision T-square style rip fence with 4-in resaw attachment.
  • Precision-balanced, nine-spoke cast-iron wheels run smoothly.
  • Easy-to-read tensioning gauge settings indicated in blade width increments.
  • Full 6-in under-guide capacity with 13-1/2-in width capacity.
  • 60 Watt lamp built into the body provides direct light on the blade and workpiece while cutting (bulb not included).
  • Chip blower ensures a clean, visible cut line.

Hot Tool Deals!!!

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $22.50

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.


100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.




Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools