Festool Trade Up

Jet 22-44PLUS Drum Sander - 649005K

20 Amp Service 1-3/4HP, 115V, Closed Stand with Casters

This sander is one of the largest in it's class. You can sand up to 44" wide with better accuracy then any other sander in it's category.

Jet 22-44PLUS Drum Sander - 649005K

Standard Equipment:

  • 22-44PLUS Drum Sander
  • 80-Grit Abrasive Strip
  • 100-Grit Abrasive Belt
  • TufTool

For pricing and availability call us toll free at 877-551-8665.

PART#: 649005K


  • Drum Length: 22"
  • Drum Speed: 1,700 RPM
  • Drum Diameter: 5"
  • Conveyor Motor: 43 in-lbs Torque, Direct Drive, DC
  • Conveyor Speed: 0 - 10 FPM
  • Maximum Board Thickness: 4"
  • Maximum Board Width: 44"
  • Minimum Board Length: 2-1/4"
  • Minimum Board Thickness: 1/32"
  • Dust Port Outside Diameter: 4"
  • Motor Power: 1-3/4 HP
  • Motor Phase: 1
  • Motor Voltage: 115
  • Motor Current: 20A


  • Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload.
  • Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments.
  • Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage.
  • Sealed and permanently lubricated drum ball bearings for longer life.
  • Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results.
  • Adjustable drum height and downward pressure feature virtually eliminates snipe.
  • Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control.
  • Patented abrasive take-up fasteners make changing abrasives quick and easy.
  • On/off switch with overload protection is front-mounted for operator's convenience.
  • One feed and one drive motor for superior sanding control.
  • Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time.
  • EXCLUSIVE SandSmart infinitely variable-feed control produces the ultimate finish at a rate of up to 10 feet per minute and prevents machine overload.

Hot Tool Deals!!!

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $22.50

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.


100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.




Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools