Saw Blades

Use with Milwaukee 6370-21 Metal Cutting Saw MILWAUKEE Metal & Stainless Cutting Circular Saw Blades were specifically designed to exceed the ...

The Torch™ metal-cutting blades with the Double Duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Nec...

The Ax Sawzall® blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wo...

Milwaukee Metal & Stainless Cutting Circular Saw Blades were specifically designed to exceed the expectations of contractors for blade life, cu...

Milwaukee® wood cutting Sawzall® blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plun...

Universal, 1-1/8" Width, Metal/Wood CuttingThe Universal E-Cut saw blade is designed to cut wood, plaster, drywall, synthetic & plastic materia...

Medium Metal Cutting 1/16" to 5/16"Diablo's next generation reciprocating saw blades with Full Contact Arched Design are specifically designed for ...

Standard, 2-1/2" Width, Wood CuttingThese standard E-Cut blades have a fine-tooth configuration specifically designed for cutting wood, plaster boa...

Ideal for straight, fine cuts. Hard and soft wood, plastics, plywood, laminated particle board 3/16" to 1-1/4". Use anti-splinter guard for splinte...

Best for General Purpose CuttingFeatures: High speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability...

80 tooth, carbide-tipped, 40° high angle ATB, 5° hook, 1/8" kerf, 5/8" arbor. Plywood and particle board laminates. An awesome plywood blade.Featur...

Milwaukee® wood cutting Sawzall® blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plun...

20 tooth, carbide-tipped, 1/8" kerf, 5/8" arbor. Fast feed rip for thick hardwood without burning. Ideal for joinery and special uses.Features: All...

Standard, 1-3/8" Width, Wood CuttingBi-metal teeth, offset, high cutting speed. Extremely durable and robust. For hardwood, softwood and all other ...

Universal, 1-3/4" Width, Metal/Wood CuttingThe Universal E-Cut saw blade is designed to cut wood, plaster, drywall, synthetic & plastic materia...

Splinter-free cutting through down-cutting teeth. Straight, fine cuts in plywood, laminated particle board, hard and soft wood, plastics 3/16" to 1...

6" bi-metal, 14/18 TPIApplication: Thin to Medium Metals (3/32" to 5/16") Diablo Steel Demon reciprocating saw blades are specifically designed for...

This replacement carbide-tipped blade is for use on Crain Model No. 775, No. 777, No. 785 or No. 795 Toe-Kick Saws. It is a 3-3/8" diameter blade w...

Ideal for aluminum. Fast, straight cuts (easy curve cutting, flexible and break resistant) in aluminum 3/16" to 5/8". Plastic 3/16" to 1-1/4". Non-...

Fits Most 14" Band SawsAll Pro PGT, Precision Ground Tooth band saw blades for the professional user. Unique carbon-rich steel - optimum balance be...

Best for Metal CuttingFeatures: High speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability Patented ...

9" bi-metal, 6/12 TPIApplication: Nail-Embedded Wood Diablo Demo Demon reciprocating saw blades are specifically designed for maximum performance i...

60 tooth, carbide-tipped, 30° ATB, 5° hook, 3/32" kerf, 5/8" arbor. Scratch-free, polished crosscut and rip cuts on wood.Features: All Forrest saw ...

40 tooth, carbide-tipped, 15° ATB, 20° hook, 1/8" kerf, 5/8" arbor. Rips, crosscuts and miters on all types of wood.Features: All Forrest saw blade...

5/8" bore, dado up to 29/32" wide in 1/32" increments.Features: All Forrest saw blades are tipped with corrosion resistant, double-hard C-4 submicr...

80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 0.115" kerf, 1" arbor. All types of wood.Features: All Forrest saw blades are...

Carbide-tipped replacement blade for the Crain No. 835 Heavy Duty Undercut Saw. Large 6-1/2" diameter allows the saw to fully undercut inside corne...

Carbide-tipped replacement blade for the Crain No. 812 Super Saw, No. 820 Heavy-Duty Undercut Saw, or No. 825 Heavy Duty Undercut Saw. The large 6-...

For use with 6238 and 2729 Deep-Cut Band SawsMaximize your band saw performance and make straight, accurate cuts in a variety of materials with the...

The Milwaukee 49-94-3000 is a three pack of 3" x .040 x 3/8" cut-off wheels. Rated for a maximum 20,000 RPM this wheel is an ideal solution for cut...

80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 7/64" kerf, 5/8" arbor. All types of wood.Features: All Forrest saw blades ar...

Standard, 2-1/2" Width, Wood CuttingBi-metal teeth, offset, high cutting speed. Extremely durable and robust. For hardwood, softwood and all other ...

High Speed Steel (HSS) Blade for fiberglass, carbon fiber, 20 gauge sheet metal and harder woods. Recessed design allows working flush against adja...

The Ax Sawzall® blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wo...

The Torch™ metal-cutting blades with the Double Duty Upgrade™ feature a tooth form optimized for the longest life and maximum durability. Tough Nec...

Fits Most 14" Band SawsFor contour cutting and resawing exotic wood, hard/soft wood, plastic, steel and non-ferrous metals (with speed reduction) i...

Best for Wood CuttingFeatures: High speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability Patented T...

24 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor.Diablo framing blades provide exceptional long life in ripping and crosscutting applications.Featur...

Precision, 1-3/8" Width, Wood CuttingThese E-Cut blades have a Japanese pull-saw tooth pattern for a very fast, aggresive cut. They are designed fo...

Ideal for fine, splinter-free curve cuts. Plywood, plastics, laminated particle board, hard and soft wood 5/64" to 3/4".Specifications: Material: H...

Thin Kerf metal-cutting blades with the Double Duty Upgrade™ feature a tooth form that is optimized for the longest life and increased speed. Tough...

Thin Kerf metal-cutting blades with the Double Duty Upgrade™ feature a tooth form that is optimized for the longest life and increased speed. Tough...

The Ax Sawzall® blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wo...

Specifications: Length: 12" TPI: 5 QTY: 5 Application: Pruning trees, smooth sawing green woods. Deep tooth design, fleamed filed. Clean cuts wood ...

For use with the 6242-6 and 2629-22 Compact Band SawsMaximize your compact band saw performance and make straight, accurate cuts in a variety of ma...

Makita has a deep line-up of metalworking solutions. Get the right accessory for grinding applications with Makita INOX Grinding Wheels. ItÕs desig...

60 ATB tooth, -5° hook, 0.090" kerf, 5/8" arbor.Provides a fine finish cut for sliding miter saws and radial arm saws. Thin kerf blade requires les...

100 tooth ASFG, 7° hook, 0.098" kerf, 1" arbor.This Diablo ultimate flawless finish blades with Axial Shear Face Grind (ASFG) tooth geometry let tr...