Festool Power Tools

6-1/4" Plunge Cut Circular Saw with 55" Rail in Systainer 3The Festool TS 55 is not your standard circular saw. The saw rides on a guide rail, or t...

Specifications: Grit: Aluminum Oxide & Ceramic Grit Grit Coating: Closed Coated Bonding: Synthetic Resin Bonding Level: Closed Leveled Applicat...

Used with the plunge cut circular saws or routers.Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connect...

8-1/4" Plunge Cut Circular Saw with 75" Rail - 575390Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its p...

with Systainer³The Rotex RO 150 can switch between three different modes: coarse sanding, fine sanding, and polishing. The dual-mode sanding featur...

Compatible with Festool DTS 400 and DTSC 400 sanders. Granat is our most long-lasting and highest performing abrasive and is well suited for nearly...

This compact powerhouse offers an impressive service life thanks to its extremely robust hammer mechanism. The perfect combination of the new gener...

CT 36 E Vacuum Replacement Filter Bag 5 PackStandard Equipment:Five CT 36 E Self-Cleaning Filter BagsSpecifications: Material: Pliable Fleece Max F...

6.9 Gal Capacity, 137 CFM Max Suction, HEPA Filter Compact but large. Light but powerful. Whether it's used on the construction site or in the work...

with Trim Stop and Cross StopThe Domino XL DF 700 now complements the capabilities of the original Domino DF 500, with a maximum tenon size of abou...

The Domino Joiner DF 500 Q with Trim Stop and Cross StopThe Domino Joiner DF 500 Q Set, with its revolutionary cutting cutting method, simple index...

Being able to save time through organization is a key benefit for the Systainer system. Hours are wasted on a regular basis on jobsites both in the...

For the Guide Rail SystemDesigned for rapid positioning and clamping of Festool FS Guide Rails - includes fixed jaw and clamping jaw. The FS-Rapid ...

For CT 15 / CT MINI I / CT MIDI IThe filter bag captures and contains dust and debris for easy and clean disposal. Optimum utilization of filter ba...

The MFT/3 is the perfect height to make work more comfortable. V-groove channels make squaring the miter gauge easier, more accurate and provides a...

For CT 26/36/48The highest standard for filtration, HEPA filters capture 99.99% of all particulate matter down to 0.3 microns. HEPA filters (High-E...

32mm Hole DrillingThe FS FS 1400/2-LR 32 Guide Rail (55 inches) was designed specifically for use with Festool Routers and the LR 32 Hole Drilling ...

Festool FS Guide rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right rail for every ap...

Working on the jobsite requires versatility and flexibility. The combination of this drill and impact driver will allow you to handle all of the dr...

5" Dual Mode SanderThe Rotex Sander RO 125 FEQ gives you everything Rotex has to offer in a smaller, lighter package. The new RO 125 puts dual-mode...

Made from high strength, 3-layer polyester fleece with a long service life. Reuseable filter bag for disposal of dust. Made for use with Festool CT...

Plastic, with brush insert width 4-11/16" (120 mm) Fits 27mm & 36mm hose and tubes. Small nozzle creates a higher pressure vacuum flow for deep...

Always have the right Domino tenon and cutter on hand!Whether in the workshop or at the assembly location - all sizes of Domino Tenons are clearly ...

Made for the CT MINI dust extractor. Filters particle to 5 microns. Integrated flap to close bag. Includes 5 filter bags.

Made for the CT 48 dust extractor.

The perfect cleaning accessory set for use with vacuums and dust extractors. Includes one (1) general crevice nozzle, one (1) upholstery brush and ...

Made for the CT 22 E dust extractor. Filters particle to 5 microns. Integrated flap to close bag and dust cap. Includes 5 filter bags.

Provides filtration at 99.97% efficiency to 0.3 microns. Breathe easier in the shop or the jobsite with HEPA filtration. Fits the Festool CT-SYS mo...

Clamping Thickness 4-11/16"Designed as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece ...

8-1/4" Plunge Cut Circular Saw - 575389Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpo...

12.7 Gal Capacity, 137 CFM Max Suction, HEPA Filter Large dust volumes? Not a problem! Thanks to its huge container capacity of 48 l, the CT 48 is ...

9.5 Gal Capacity, 137 CFM Max Suction, HEPA Filter Compact but large. Light but powerful. Whether it's used on the construction site or in the work...

4.0 Gal Capacity, 130 CFM Max Suction With the new CT MIDI I, Festool affirms its place as the industry-leading, no-compromise pioneers of dust ext...

The OF 1400 EQ router provides 1,400 Watts of power in a machine that weighs less than 10 lbs. It accepts 1/2", 1/4" or 8mm bits. With enough power...

With its modular design and tool-less base changes, the MFK 700 EQ can easily transform from a vertical to a horizontal position with a few simple ...

Top Handle EC TEC Brushless JigsawTackle your most demanding applications with the robust and versatile new Carvex Jigsaw. It features multiple opt...

for ETS 125 REQ, ETSC 125 The Festool Edge Sanding Guide gives you the speed and reliable finish quality that you would otherwise only expect from ...

Compatible with Festool RS 400, RTS 400, RTSC 400, and LS 130 sanders. A premium abrasive composed of hardened Aluminum Oxide and Ceramic Grit for ...

A great all around sander, the DTS 400 is designed for fine sanding small, angular surfaces that are difficult to reach. With a short 5/64" (2 mm) ...

No more clogged filters – the AUTOCLEAN (AC) automatic main filter cleaning keeps the filter clean and provides a continuously high suction power. ...

Low Profile Jigsaw with Smart Ergonomics in New Sys Gen 3Most jigsaws have a hard time staying on course. Hard material and curves can easily cause...

Compact Brushless Random Orbit Finish Sander w/ Systainer_ Equipped with the EC-TEC Brushless Motor, these low-profile, long-life, and low-vibratio...

Extra Fine 6" Random Orbital SanderThe ETS 150/3 is a favorite for fine sanding and extra fine sanding, producing an excellent surface finish with ...

Compatible with the Domino DF 500 JoinerEach carbide tipped cutter is color-matched to the different Domino tenon sizes making cutter selection qui...

For BHC 18, PDC 18, and Mobile Dust Extractors CTFor drilling in floors, walls and ceilings up to a maximum of 12mm (1/2") to reduce dust or debris...

For the Festool RO 90 DX SanderThis adapting plate allows the RO 90 Sander to become a detail sander. Does not include the interchangeable sanding ...

For the Planex Drywall SanderActs as a dampening element between the sanding pad and sandpaper. The foam interface pad allows the Planex's sanding ...

For the ETS EC 125, LEX 125The secret to a great finish lies in the use of the right pad and abrasive for the application at hand. With the Festool...