Fein Power Tools

For use with the 9-20-25 Turbo II VacuumKeeps debris from spreading inside the tank. Cannot be used with the 5 Micron filter. You must use a bag wh...

Unperforated with Hook & Loop BackingFor universal application on nearly all surfaces.Specifications: Type: Triangular Backing: Hook & Loop

For the 9-20-27 Turbo I only. Holds 2 to 3 times more dust than paper bags. 5 bags included.

Perforated with Hook & Loop BackingAluminum oxide and full resin bond guarantee fast material removal, minimum glazing and long tool life. For ...

The T111MCRN increases filtration to 99.97% of all particles 1 micron and over.Standard Equipment:1 Micron FilterSpecifications:Filter Capacity: 1....

Universal, 1-1/8" Width, Metal/Wood CuttingThe Universal E-Cut saw blade is designed to cut wood, plaster, drywall, synthetic & plastic materia...

5.8 Gallon Wet/Dry Vacuum with Auto-Start Compact wet and dry vacuum with connection for power tools during workshop and installation use. Standard...

For the 9-20-28 Turbo II only. Holds 2 to 3 times more dust than paper bags. 5 bags included.

For use with the 9-20-24 Turbo I VacuumKeeps debris from spreading inside the Turbo I tank.Standard Equipment:3 Turbo I Dust BagsFeatures: You must...

8.4 Gallon Wet/Dry Vacuum with Auto-Start Powerful wet and dry dust extractor for connecting power tools during workshop and installation use. Stan...

Hook & Loop BackingFor use with the finder pads on wood, metal, welds, fiberglass, plastic, paint, filler, and leather. Hook & loop-backed.

Includes 2 metal extension tubes, 1 combination tool with interchangeable inserts, 1 crevice nozzle, 1 dusting brush, 1 elbow.

Standard, 2-1/2" Width, Wood CuttingThese standard E-Cut blades have a fine-tooth configuration specifically designed for cutting wood, plaster boa...

Use with hook & loop triangular sandpaper. Offered in a variety of thicknesses.

For use with the 9-20-26 Turbo III VacuumKeeps debris from spreading inside the tank. Cannot be used with the 5 Micron filter. You must use a bag w...

Standard, 1-3/8" Width, Wood CuttingBi-metal teeth, offset, high cutting speed. Extremely durable and robust. For hardwood, softwood and all other ...

Bimetal with double-row Japanese toothing for all wood materials, drywall and soft plastics. Increased service life and strength. Fastest work perf...

Universal, 1-3/4" Width, Metal/Wood CuttingThe Universal E-Cut saw blade is designed to cut wood, plaster, drywall, synthetic & plastic materia...

Standard, 2-1/2" Width, Wood CuttingBi-metal teeth, offset, high cutting speed. Extremely durable and robust. For hardwood, softwood and all other ...

Precision, 1-3/8" Width, Wood CuttingThese E-Cut blades have a Japanese pull-saw tooth pattern for a very fast, aggresive cut. They are designed fo...

Difficult transitions present no problems and can be sanded with extreme accuracy. The sanding pad is not connected directly to the machine's drive...

Fein Starlock Mounting System Narrow, waisted shape for optimal cutting speed and good swarf removal. Specifications: Blade Width: 1-3/8" Blade Le...

StarLock Plus Mount: Suitable for Fein MultiTalent, MultiMaster, SuperCut and BoschFor fast, efficient sanding of medium-sized areas. The alternati...

High Speed Steel (HSS) Blade for fiberglass, carbon fiber, 20 gauge sheet metal and harder woods. Recessed design allows working flush against adja...

For a power tool with a port diameter other than 1-3/8" to connect to the 1-3/8" diameter hose. Determine the fit you need and then cut the adaptor.

Natural bristles, 120 x 45 mm bristle edging.

For the 9-20-27 Turbo I and 9-20-28 Turbon II Vacuums only. Use instead of the fleece filter bags, permanent and washable.

63-piece accessory set for sanding in corners and on edges. Suitable for all FEIN MultiTools and all other commercially available multi-tools with ...

Bimetal with fine teeth for sheet metal up to 5/64 in [2 mm], aluminum profiles, copper pipes. Also for GFRP and other hard plastics. Extremely pre...

StarLock MountFor use in very narrow and hard-to-reach spots in channels, grooves, openings and rabbets. Also for mold-making, on curves and in slo...

Standard, 1-3/8" Width, Wood CuttingThese standard E-Cut blades have a fine-tooth configuration specifically designed for cutting wood, plaster boa...

Precision, 2-1/2" Width, Wood CuttingThese E-Cut blades have a Japanese pull-saw tooth pattern for a very fast, aggresive cut. They are designed fo...

The finger rasp is useful for extremely tight areas that the standard rasp can't fit into.

With stainless steel sliding surface and bristles on all sides, suitable for smooth floors and fiber floor coverings.

HEPA filter for the 9-20-27 Turbo I and 9-20-28 Turbon II Vacuums only.

Using the principle of Oscillating Movement the MultiMaster offers high performance in a huge variety of applications – effortlessly and safely. T...

450 Watt Oscillating Multi-Tool w/StarLockMax Tool Mount The best MultiTool for rapid work progress in interior construction and renovation with a ...

450 Watt Oscillating Multi-Tool w/StarLockMax Tool Mount The best MultiTool for ultra-rapid work progress for interior construction and renovation ...

High performance wet and dry vacuum cleaner with power tool connection for workshop and installation use. Standard Equipment: Turbo II Vacuum (1) ...

8.5 Gallon Wet/Dry Dust ExtractorHigh performance wet and dry vacuum cleaner with power tool connection for workshop and installation use.Standard ...

Featuring the StarLock Mounting SystemBimetal with wavy universal teeth. Broad application spectrum for sheet metal up to 5/64 in [2 mm], aluminum ...

Fein Starlock Mounting System3 E-Cut plunge cut saw blades for precision sawing work in wood materials.Standard Equipment: (1) 2" E-Cut Curved Saw ...

High Speed Steel (HSS) Blade for fiberglass, carbon fiber, 20 gauge sheet metal. and harder woods. This blade is flat, and has a full cutting surface.

Fein Starlock Mounting SystemWide shape for maximum cutting performance and long straight cuts.Specifications: Blade Width: 2-1/2" Blade Length: 2"...

Fein Starlock Mounting SystemMedium width for numerous applications.Specifications: Blade Width: 2" Blade Length: 2" Features: Set teeth for all wo...

Fein Starlock Mounting SystemNarrow, waisted shape for optimal cutting speed and good swarf removal.Specifications: Blade Width: 1-3/8" Blade Lengt...

26-piece accessory set for all your renovation work. Suitable for all FEIN MultiTools and all other commercially available multi-tools with the Sta...