Products

Profiling Router Bits: Beading Router Bits, Carbide Tipped: 5/16" Rad x 1-1/8" Dia x 1/2" x 1/4" ShankCut a quarter-round shape bounded by fillets,...

Profiling Router Bits: Beading Router Bits, Carbide Tipped: 3/8" Rad x 1-1/4" Dia x 5/8" x 1/4" ShankCut a quarter-round shape bounded by fillets, ...

Profiling Router Bits: Beading Router Bits, Carbide Tipped: 3/8" Rad x 1-1/4" Dia x 5/8" x 1/2" ShankCut a quarter-round shape bounded by fillets, ...

Profiling Router Bits: Beading Router Bits, Carbide Tipped: 1/2" Rad x 1-1/2" Dia x 3/4" x 1/4" ShankCut a quarter-round shape bounded by fillets, ...

Profiling Router Bits: Beading Router Bits, Carbide Tipped: 1/2" Rad x 1-1/2" Dia x 3/4" x 1/2" ShankCut a quarter-round shape bounded by fillets, ...

Grooving Router Bits: Round Over Groove Router Bits, Carbide Tipped: 1/4" Rad x 3/4" Dia x 1/2" x 1/2" ShankThis bit creates a flat-bottom groove b...

Grooving Router Bits > Round Over Groove > Carbide Tipped, 3/8" Rad x 1" Dia x 5/8" x 1/2" Shank This bit creates a flat-bottom groove betwee...

Grooving Router Bits > Round Over Groove > Carbide Tipped, 1/2" Rad x 1-3/8" Dia x 1" x 1/2" ShankThis bit creates a flat-bottom groove betwe...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 23° x 1/2" Dia x 1/2" x 1/4" ShankCut, trim, and bevel laminates with this one bit. C...

Trimming Router Bits: Bevel Trim Router Bits, Solid Carbide: 1/4" Dia x 1/4" x 1/4" ShankThe ideal laminate trimming bit for high-volume production...

Trimming Router Bits: Bevel Trim Router Bits, Solid Carbide: 7° x 1/4" Dia x 1/4" x 1/4" ShankThe ideal laminate trimming bit for high-volume produ...

Straight Plunge Router Bits: Stagger Tooth Panel Pilot Router Bits, Carbide Tipped: 1/2" Dia x 1-1/2" x 1/2" ShankTwo cutting edges spaced 180 degr...

Straight Plunge Router Bits: Stagger Tooth Panel Pilot Router Bits, Carbide Tipped: 1/2" Dia x 2-1/2" x 1/2" ShankTwo cutting edges spaced 180 degr...

Profiling Router Bits: Bullnose Router Bits, Carbide Tipped: 1/8 x 1/4" Rad x 1-1/8" Dia x 1" x 1/2" Shank Cut a thumbnail in a single pass, flanke...

Profiling Router Bits > Bullnose > Carbide Tipped, 1/8" "Rad x 23/32" Dia x 9/16" x 1/2" Shank Shape the full edge of a workpiece with a bull...

Profiling Router Bits > Bullnose > Carbide Tipped, 9/64" "Rad x 21/32" Dia x 3/4" x 1/2" ShankShape the full edge of a workpiece with a bulln...

Profiling Router Bits: Bullnose Router Bits, Carbide Tipped: 17/64" Rad x 1-1/32" Dia x 1" x 1/2" ShankShape the full edge of a workpiece with a bu...

Profiling Router Bits: Bullnose Router Bits, Carbide Tipped: 3/8" Rad x 1-1/4" Dia x 1-5/16" x 1/2" ShankShape the full edge of a workpiece with a ...

Profiling Router Bits: Bullnose Router Bits, Carbide Tipped: 1/2" Rad x 1-11/16" Dia x 1-9/16" x 1/2" ShankShape the full edge of a workpiece with ...

Profiling Router Bits: Bullnose Router Bits, Carbide Tipped: 3/8" Rad x 1-3/8" Dia x 1-5/16" x 1/2" ShankShape the full edge of a workpiece with a ...

Profiling Router Bits: Bullnose Router Bits, Carbide Tipped: 1/2" Rad x 1-13/16" Dia x 1-9/32" x 1/2" ShankShape the full edge of a workpiece with ...

Profiling Router Bits: Bullnose Router Bits, Convex Edging, Carbide Tipped: 23/32" Rad x 13/16" Dia x 1-1/4" x 1/4" ShankCuts a shallow arc - the f...

Profiling Router Bits: Bullnose Router Bits, Convex Edging, Carbide Tipped: 23/32" Rad x 13/16" Dia x 1-1/4" x 1/2" ShankCuts a shallow arc - the f...

Profiling Router Bits: Hand Grip Plunge Router Bits, Carbide Tipped: 1/2" Rad x 45° x 1-1/8" Dia x 1-9/16" x 1/2" ShankIntended for forming and edg...

Profiling Router Bits: Veining Router Bits, Carbide Tipped: 1/16" x 1/8" Dia x 1/4" ShankStandard Equipment:51700 Veining Single Flute Router BitSp...

Trimming Router Bits: Combination Flush and 7° Bevel Trimmer Router Bits, Carbide Tipped: 1/4" Dia x 3/8" x 1/4" ShankA bit designed specifically f...

Grooving Router Bits: Rip & Slotting Router Bits, Carbide Tipped: 1/4" Dia x 5/16" x 1/4" ShankUse this bit for cutting sheets of laminate, pan...

Signmaking Router Bits: V-Groove Router Bits, Solid Carbide: 1/4" Dia x 3/8" x 1/4" ShankRout fine-line V-Grooves in laminate-covered and wooden su...

Trimming Router Bits: Hole and Flush Cut Router Bits, Solid Carbide: 1/4" Dia x 1/4" x 1/4" ShankThis bit is used where laminate is applied over pr...

Jointing Router Bits: 3 Wing Slotting Cutter Assemblies: 1-7/8" Dia x 1/16" x 1/4" ShankGroove edges for T-moldings, splines or biscuits, and other...

Jointing Router Bits: 3 Wing Slotting Cutter Assemblies: 1-7/8" Dia x 5/64" x 1/4" ShankGroove edges for T-moldings, splines or biscuits, and other...

Jointing Router Bits: 3 Wing Slotting Cutter Assemblies: 1-7/8" Dia x 3/32" x 1/4" ShankGroove edges for T-moldings, splines or biscuits, and other...

Jointing Router Bits: 3 Wing Slotting Cutter Assemblies: 1-7/8" Dia x 1/8" x 1/4" ShankGroove edges for T-moldings, splines or biscuits, and other ...

Jointing Router Bits: 3 Wing Slotting Cutter Assemblies: 1-7/8" Dia x 5/32" x 1/4" ShankGroove edges for T-moldings, splines or biscuits, and other...

Jointing Router Bits: 3 Wing Slotting Cutter Assemblies: 1-7/8" Dia x 3/16" x 1/4" ShankGroove edges for T-moldings, splines or biscuits, and other...

Jointing Router Bits: 3 Wing Slotting Cutter Assemblies: 1-7/8" Dia x 1/4" x 1/4" ShankGroove edges for T-moldings, splines or biscuits, and other ...

Jointing Router Bits: Adjustable Slotting Cutter Router Bit Sets: 1-7/8" Dia x 1/8" to 23/32" x 1/2" ShankThe Quadraset is an adjustable slotting a...

Jointing Router Bits: Box Joint Router Bit Set, Carbide Tipped: 1-7/8" Dia x 1-3/8" x 1/2" ShankCut strong, attractive box joints for small boxes, ...

Door Making Router Bits: Finger Grip & Door Lip Router Bits, Carbide Tipped: 1/4" x 3/16" Rad x 2" Dia x 1-1/4" x 1/2" ShankProduce clean, mode...

Door Making Router Bits: Window Sill Edge Router Bits, Carbide Tipped: 7/32" Rad x 1-1/4" Dia x 7/8" x 1/2" ShankThese bits shape a flowing ogee ed...

Door Making Router Bits > Window Sill Edge > Carbide Tipped, 3/8" Rad x 1-7/16" Dia x 1-1/8" x 1/2" ShankThese bits shape a flowing ogee edge...

Door Making Router Bits > Window Sill Edge > Carbide Tipped, 23/64" Rad x 1-7/16" Dia x 1-3/8" x 1/2" ShankThese bits shape a flowing ogee ed...

Profiling Router Bits: Classical Cove & Bead Router Bits, Carbide Tipped: 13/64" x 5/16" Rad x 1-1/4" Dia x 1/2" x 1/4" ShankThis bead and cove...

Profiling Router Bits: Classical Cove & Bead Router Bits, Carbide Tipped: 13/64" x 5/16" Rad x 1-1/4" Dia x 1/2" x 1/2" ShankThis bead and cove...

Profiling Router Bits: Classical Cove & Bead Router Bits, Carbide Tipped: 7/32" x 15/64" Rad x 1-1/2" Dia x 5/8" x 1/4" ShankThis bead and cove...

Profiling Router Bits: Classical Cove & Bead Router Bits, Carbide Tipped: 7/32" x 15/64" Rad x 1-1/2" Dia x 5/8" x 1/2" ShankThis bead and cove...

Door Making Router Bits: Ogee Router Bits, Carbide Tipped: 5/32" Rad x 1-3/8" Dia x 1/2" x 1/4" ShankThis ogee pattern has a step at the end of the...

Door Making Router Bits: Ogee Router Bits, Carbide Tipped: 5/32" Rad x 1-3/8" Dia x 1/2" x 1/2" ShankThis ogee pattern has a step at the end of the...