Festool Trade Up

Makita HR4013C 1-9/16" Rotary Hammer Kit

SDS-Max Drive with Advanced Anti-Vibration Technology

Makita Authorized Dealer
Makita HR4013C Rotary Hammer

Standard Equipment:

  • HR4013C Rotary Hammer
  • Side Handle
  • Depth Gauge
  • Tool Case
Makita HR4013C Application
PART#: HR4013C
COST: $579.00


  • Rating: 120 Volt AC
  • Amperage: 11.0
  • No-load BPM: 1,450 - 2,900
  • Impact Energy: 8.4 ft-lbs
  • Maximum Concrete Capacity: 1-9/16"
  • Tool Holder: SDS-Max
  • Length: 18-11/16"
  • Weight: 15.1 lbs


  • Powerful 11 AMP motor delivers 8.4 ft-lbs. of impact energy to handle the most demanding applications.
  • Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2.
  • Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration.
  • Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user.
  • Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit.
  • Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs.
  • Soft start suppresses start-up reaction for more control and better accuracy.
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced.
  • L.E.D. power light indicates switch failure or cord damage.
  • Variable speed control dial enables user to match the speed to the application for greater versatility.
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds.
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling.
  • Automatic brush cut-off protects commutator from damage for longer tool life.
  • 2-mode operation for "Chipping Only" or "Hammering with Rotation".
  • 24 bit angle settings allow the bit to be set at different positions for operating convenience.
  • One-touch sliding chuck for quick bit changes.

Hot Tool Deals!!!

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $22.50

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.


100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.




Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools