Festool Trade Up

Fein Supercut FSC 2.0-M Basic Kit

The Fein SuperCut is designed to save you a tremendous amount of effort and inconvenience in a wide variety of jobs. The SuperCut is a truly versatile and expandable system. It enables work to be completed almost without effort, yet at the same time safely, rapidly and with extreme precision, even in corners and 90 degree angle. The unique oscillation technology means this professional electric power tool can also be used to preform tasks which previously had to be done laboriously by hand.

Fein SuperCut FSC 2.0-M Kit

Standard Equipment:

  • SuperCut FSC 2.0
  • Wrench
  • Deluxe Carrying Case


See other Fein Supercuts.


  • Rating: 120 V, 3.3 Amps
  • Power Input: 400 Watts
  • Power Output: 220 Watts
  • No-load OPM: 11,000 to 18,500
  • Weight: 3.2 lbs


  • The Fein SuperCut has a high-performance 400 Watt motor for rapid working progress in all fields of application.
  • This heavy duty tool oscillates 4 degrees at 18,500 strokes per minute.
  • Drive with oil-bath lubrication for long life.
  • Blades fit onto a twelve-position-splined shaft for efficient power transmission and exact positioning.
  • Rapid cutting and removal of a wide variety of materials.


Precision Sawing
Precision cut-outs are possible at any time. You can even saw hand-held sections precisely and with minimal vibrations.

Fine Sanding
Removing paint and giving surfaces a final sanding down, the triangular shape of the sanding pad means you will be able to reach into every corner and angle for detail sanding.

Removing Excess Grout
Damaged elastic silicone or acrylic grout can be removed quickly and thoroughly using the mushroom shaped blade. New grout can then be applied, with no retouching work required.

Sawing Through Metal Elements
Using the HSS saw blade you can effortlessly trim sheet metals, tracks, copper pipes, metal fittings for edge profiles even when these are mounted.

Adjusting Door Jambs
Door jambs can now be precisely trimmed with the E-Cut saw blades, because the cropped shaped enables you to work flush to surfaces. The often tricky cutouts required when renovating old buildings also presents no problem.

Sawing Plasterboard and Plastic
The E-Cut saw blades speed up fitting tasks. Cutting plasterboard to shape and producing cut-outs is achieved with high cutting speed, yet with significantly less dust generation then is the case with other saws.

Replacing Tiles
The diamond-coated saw blade cuts through marble, epoxy resin and concrete trass joints. Tiles can then be broken up and removed without difficulty.

Sanding Down Cement & Adhesive
The hard -alloy rasp can be used to sand flat old tile adhesive before retiling. Plaster remnants or lime residues in corners can be removed quickly and easily.

Removing Adhesive & Coating Residues
New floor coverings require a clean base. The scraper blade can be used toremove persistent adhesive and coating residues, quickly and easily.

Deep Notching
The long E-Cut saw blades can be used to cut deep notches and grooves. Just like with a mortise chisel, you can plunge straight into the material.

Hot Tool Deals!!!

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $22.50

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.


100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.




Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools