Forrest Saw Blades
- All Forrest saw blades are tipped with corrosion resistant, double-hard C-4 submicron carbide for lsharper edges and longer life.
- 10" blades are hand-straightened to a runout of .001/.002 for maximum cut quality.
- Laser cut for true quiet sawing.
- All Forrest saw blades are designed to provide super smooth, chipless cuts.
FORREST BLADE INDEX
WOODWORKER I WOODWORKER II CHOP MASTER | DURALINE HI A/T DADO SETS DAMPENER - STIFFENERS |
Forrest Woodworker I Saw Blades
Forrest trim and cross-cut all purpose blades for table saws and radial arm saws. 30° Alternate Top Bevel (20° on the 12") design crosscuts and miters without splintering. Special side clearances produce super smooth cuts with or across the grain. Good for trim work, plywood veneers, and melamine. Self-feeding tendency is reduced by thin kerf and 5° face hook.


10" Woodworker I Saw Blade
Add to Cart to See Price
60 tooth, carbide-tipped, 30° ATB, 5° hook, 3/32" kerf, 5/8" arbor. Scratch-free, polished crosscut and rip cuts on wood.


12" Woodworker I Saw Blade
Add to Cart to See Price
60 tooth, carbide-tipped, 20° ATB, 5° hook, 1/8" kerf, 1" arbor. Scratch-free, polished crosscut and rip cuts on wood.
Forrest Woodworker II Saw Blades
Forrest all purpose blades for table saws and miter saws. 15° Alternate Top Bevel design rips, crosscuts and miters on all hard and soft woods. Slices oak or birch veneer without splintering at moderate feed. Planer side clearances yield smooth as sanded cuts. Side wobble is held to 0.001".


10" Woodworker II Saw Blade
Add to Cart to See Price
40 tooth, carbide-tipped, 15° ATB, 20° hook, 1/8" kerf, 5/8" arbor. Rips, crosscuts and miters on all types of wood.


10" Customized Woodworker II Saw Blade
Add to Cart to See Price
20 tooth, carbide-tipped, 1/8" kerf, 5/8" arbor. Fast feed rip for thick hardwood without burning. Ideal for joinery and special uses.
Forrest Chop Master Saw Blades
For miter-chop saws, sliding compound and radial arm saws. Heavy than normal steel plate maintains maximum stability for the best cut. The 30° ATB with raker tooth design produces tight, perfectly cut miter joints with no bottom splintering. Feeds easy with smooth sawn edges on all types of wood.


10" Chop Master Saw Blade
Add to Cart to See Price
80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 7/64" kerf, 5/8" arbor. All types of wood.


12" Chop Master Saw Blade
Add to Cart to See Price
80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 0.115" kerf, 1" arbor. All types of wood.
Forrest Duraline HI A/T Saw Blades
A great blade for cutting birch and oak ply veneers and low pressure laminates such as melamine and vinyl over particle board. No need for a scoring set up as this blade cuts clean with no splintering or chip-out on top and bottom surfaces. Also recommended for fine cross-cutting on all woods.


10" Duraline HI A/T Saw Blade
Add to Cart to See Price
80 tooth, carbide-tipped, 40° high angle ATB, 5° hook, 1/8" kerf, 5/8" arbor. Plywood and particle board laminates. An awesome plywood blade.
Forrest Dado Blade Sets
Forrest blades for table saws and radial arm saws. No tear-out when grooving across soft wood, hard wood, oak and birch ply veneer or melamine. Negative hook and scoring action of outside blades make perfect edged grooves with flat, square bottoms. Rip, cross-cut, and miter at any depth. #C-4 carbide tips on all trim and chipper blades. Dado up to 29/32" wide in 1/32" increments.


6" Dado King Blade Set
Add to Cart to See Price
5/8" bore, dado up to 29/32" wide in 1/32" increments.
Includes:
- Two 24 tooth, carbide-tipped trim saw blades.
- Four 1/8" kerf, 4 tooth chippers.
- One 1/16" kerf, 4 tooth chipper.
- One 3/32" kerf, 4 tooth chipper.
- Two each of .010, .012, .015 magnetic shims.
- Blade Runner plastic carrying case.


8" Dado King Saw Blade Set
Add to Cart to See Price
5/8" bore, dado up to 29/32" wide in 1/32" increments.
Includes:
- Two 24 tooth, carbide-tipped trim saw blades.
- Four 1/8" kerf, 4 tooth chippers.
- One 1/16" kerf, 4 tooth chipper.
- One 3/32" kerf, 4 tooth chipper.
- Two each of .010, .012, .015 magnetic shims.
- Blade Runner plastic carrying case.
See DK08244 for more information.
Forrest Dampeners / Stiffeners
- Helps kill saw scream-whistle from a vibrating blade surface.
- Dampen out motor and belt vibrations from being transmitted up to the rim of the teeth.
- Greatly reduces cutting noise.
- Hold blade rigid and true for better cuts on your machine.
- Hardened and precision ground flat with 0.001" to keep your blade true.
- Can be removed instantly if need requires.


5" Dampener - Stiffener
Add to Cart to See Price
To be used with 10" saw blades. 5" diameter, 5/8" bore.