Greenlee Voltage Meters & Circuit Testers
Touchless AC Voltage Indicator
COST: $99.00
Specifications:
- Voltage Detection: ACV 24-1,000
- Frequency: 50-500Hz
- Measurement Category: Cat III, 1,000V per UL 3111-1
Features:
- Bright LED and audible alarm if voltage is present.
- Fast, easy, noncontact voltage detection.
- Adjustable sensitivity.
- Identifies hot and neutral conductors.
- Checks individual breakers for power.
- One 9V battery included.
Mini Digital Multimeter
COST: $17.50
Specifications:
- Voltage Measurements...
AC V: 200.0, 300 V
DC V: 200.0 m, 2.000; 20.00, 200.0, 300 - Amperage Measurements: 2.000, 20.00, 200.0mA
- Resistance: 200.0, 2000, 20.00k, 200.0k, 2,000M
- Measurement Category: Cat II, 300V per UL 61010B-1
Features:
- Use to measure voltage and check batteries.
- Great for measuring current of small electronic circuits.
- Includes elastomer boot to protect meter from damage.
- AC/DC voltage, DC amperage measurement.
- Resistance measurement.
- Audible continuity and diode tests.
- Tests 1.5V and 9V batteries.
GFCI Polarity Cube
COST: $10.50
Specifications:
- Capacity: 120VAC
Features:
- Greenlee's GT-10GFI polarity cube is designed to work with typical 3-wire NEMA 120 volt receptacles.
- The tester is ergonomically designed to fit comfortably in the hand for hours of tireless troubleshooting.
- Once plugged into a standard outlet the light sequence on the GT-10GFI provides a visual indication that wiring is correct or incorrect.
- The GT-10GFI works with GFI outlets and confirms that the ground fault outlet is working properly.
Non-Contact Voltage Detector
COST: $12.95
Specifications:
- Voltage Detection: AC V 50-1000
- Frequency: 50-500Hz
- Measurement Category: CAT IV, 1000V
Features:
- Fast, easy, non-contact voltage detection.
- Bright LED and audible alarm if voltage is present.
- ON/OFF switch for longer battery life.
- Use to detect the presence of voltage at outlets, lighting fixtures, circuit breakers, wires and cables or to find a break in a wire.
- Comfort grip to ease fatigue.
- Convenient pen size fits into pocket or tool pouch.
- Replace batteries quickly by pressing the release lever and twisting the top of the tester.
- Two 1.5V AAA batteries included.
- Lifetime Limited Warranty.
Non-Contact Low Voltage Detector
COST: $13.95
Specifications:
- Voltage Detection: 12-90VAC
- Frequency: 50-500 Hz
- Measurement Category: CAT III, 300V
Features:
- Use to detect voltage in low voltage applications ranging from 12-90 volts AC.
- Safe, non-contact voltage detection.
- Bright LED and audible alarm sound if voltage is present.
- On/Off switch for longer battery life.
- Convenient pen-size device easily fits into pockets or tool punches.
Voltage and Continuity Tester
COST: $41.50
Specifications:
- Voltage Detection: 19 to 1000V AC, 5 to 1000V DC
- Continuity Verification: 0 to 50 Kohms
- Frequency DC: 45-65 Hz
- Measurement Category: CAT IV, 600V; CAT III, 1000V
Features:
- AC/DC voltage and polarity measurement.
- Continuity test and single probe detection of live conductors for added flexibility.
- Overvoltage warning gives user visual notification that voltage levels have exceeded 1000V AC/ 380V DC.
- Safe, non-contact voltage detection.
- Auto-hold automatically activates when tester is removed from voltage reading.
- Visual and audible continuity.
- Includes two 1.5 Volt AAA batteries, test leads, and carrying case.
- Lifetime Limited Warranty.
Automatic Digital Multimeter
COST: $36.50
Specifications:
- Voltage Measurement: 6, 60, 450 Volts
- Resistance Measurement: 600.0 ohms; 6.000, 60.00, 600.0 Kohms; 6.000 Mohms
- Capacitance: 100.0, 1000 nF; 10.00, 100.0 mF
- Display: 6000-count LCD
- Measurement Category: CAT II, 450 V per IEC 61010-1; CAT III, 300 V
Features:
- Auto-select mode for hassle free use.
- Low impedance eliminates stray or "ghost" voltage readings.
- AC/DC voltage measurement.
- Hassle free, automatic measurement of voltage and resistance.
- Autoranging for quick, convenient measurements.
- Non-contact voltage detection for identiying live lines without contacting conductors.
- Intelligent Auto-Off for longer battery life.
- Low battery indicator.
- Resistance measurement.
- Audible continuity test.
- Frequency measurement in voltage mode.
- Capacitance measurement.
- 6000-count LCD for high resolution.
- Lifetime Limited Warranty.
Digital Multimeter
COST: $105.00
Specifications:
- Voltage Measurement: ACV - 250.0mV; 2.500, 25.00, 250.0, 750V DCV - 250.0mV; 2.500, 25.00, 250.0, 1000V
- Amperage Measurement: 250.0, 2500µA; 25.00, 250.0mA; 2.500, 10.00A
- Resistance: 250.0ohms; 2.500, 25.00, 250.0kohms; 2.500, 25.00Mohms
- AC Detective Voltage Detection Range: 30V-500V+
- Capacitance: 2.500, 25.00, 250.0nF; 2.500, 25.000µF
- Frequency: 30Hz-200kHz
- Temperature: K type, -4°F to 572°F (-20°C to 300°C)
- Measurement Category: Cat III, 600V; Cat II, 750V AC/1000V DC
Features:
- Autoranging for convenient operation, non-contact voltage detection, and to save you time.
- Data hold to capture measurements.
- Auto power off and low battery indicator.
- RS-232 capable, may be connected to a PC for extended measurement capability with optional optically isolated interface DMSC-2.
- DM-210 also features:
- Relative offset display mode to see relative changes in measurements.
- Frequency, temperature, and capacitance measurements.
- AC duty cycle.
- Includes two 1.5V AAA batteries, test leads, bead temperature probe (DM-210 only, 400 degrees F / 204 degrees C max).
AC Clamp-on Meter
COST: $45.00
Specifications:
- Amperage Measurement: 20.00, 200.0, 300A AC
- Display: 3-1/2-digit LCD, 2000-count
- Jaw Opening: 1.10" (28 mm)
- Measurement Category: Cat III, 600V per UL 3111-1
Features:
- AC current measuring capability up to 300A.
- Compact size, fits easily into a tool pouch.
- Rugged, molded grip for protection.
- Peak and data hold to capture important readings.
- Includes one AA battery, test leads, carrying case.
AC/DC True RMS Clamp Meter
COST: $229.00
Specifications:
- Amperage Measurement: 400.0, 1000A
- Voltage Measurement: AC V: 400.0, 750V;DC V: 400.0, 1000V
- Resistance: 400.0 Ohms
- Frequency: 0.400kHz
- Display: 4000-count LCD display
- Jaw Opening: 2.0" (51 mm)
- Measurement Category: Cat IV, 600V; Cat III, 750V AC/1000V DC
Features:
- True RMS for the most accurate measurement when harmonics are present.
- AC/DC amperage, AC/DC voltage, frequency and resistance measuring capability.
- Dual Hall sensor for the most accurate measurements.
- Easy to read backlit display for use in low light conditions.
- Peak and data hold to capture measurement.
- MIN/MAX feature for added versatility.
- Analog bar graph to view quick changes.
- Audible continuity test.
- Selectable Auto Off for longer battery life.
- Includes one 9 V battery, test leads, carrying case.
Circuit Breaker Finder
COST: $47.50
Specifications:
- Voltage Range: 110 - 120V AC, 60 Hz
- Measurement Category: CAT II 150V (transmitter only)
Features:
- Transmitter and receiver snap together for convenient storage.
- Compact receiver accurately locates AC breakers.
- Receiver belt clip for easy transport.
- Includes one 9 Volt Battery
- Lifetime Limited Warranty.

