Shark Grip Nail Pullers, Pry Bars

"Pull to Cut – Won't Buckle or Jump"

Both SharkGrip nail pullers and pry bars can be sharpened, and burrs removed, with a fine quality steel file. That's because these SharkGrip tools are forged from the finest heat-treated Japanese alloy steel; the nail-pulling and pry ends are double-tempered for added strength. The pulling "V" end is hand-finished for accuracy, then hardened to Rockwell 50-52 hardness. The result is a tool that is so strong it can bite into hardened and stainless steel nails.

Shark Grip Nail Pullers

Shark Grip Nail Pullers

LENGTH APPLICATION PART# COST
61/4" FINISH NAILS: 2 penny (1") to 5 penny (1-3/4")
STAPLES
21-2016 $8.50
75/8" FINISH NAILS: 3 penny (1-1/4") to 6 penny (2")
STAPLES
21-2020 $8.75
9" FINISH NAILS: 3 penny (1-1/4") to 7 penny (2-1/4") 21-2023 $9.50
101/4" FINISH NAILS: 6 penny (2") to 10 penny (3")
COMMON NAILS: 6 penny (2") to 16 penny (3-1/2")
21-2026 $10.95
11" FINISH NAILS: 6 penny (2") to 10 penny (3")
COMMON NAILS: 6 penny (2") to 16 penny (3-1/2")
21-2028 $13.50
113/4" FINISH NAILS: 8 penny (2-1/2") to 10 penny (3")
COMMON NAILS: 6 penny (2") to 16 penny (3-1/2")
21-2030 $15.50
141/8" FINISH NAILS: 10 penny (3") and up
COMMON NAILS: 6 penny (2") to 16 penny (3-1/2")
21-2036 $17.50
Check all desired items then click 'Add to Cart'. To change quantity click the 'Modify Cart' button.

Pneumatic nails tend to have weak heads that fold or shear off when you attempt to pull them out by the head. However, SharkGrip nail pullers pull from the shank of the nail, not the head. The hardened "V" of the tool makes a firm, positive bite into the nail's shank; removal is a snap. The underside of the puller is curved, so that it can easily dig into wood, and slide under the head of an imbedded nail-or into the shank of a headless one. The back of the puller is designed to double as a striking head for your hammer to make this operation even easier.

Shark Grip Pry Bars

Shark Grip Pry Bars

LENGTH APPLICATION PART# COST
8" ALL NAILS: 6 penny (2") to 16 penny (3-1/2") 21-2220 $11.50
10"Back-ordered until Nov 15 ALL NAILS: 6 penny (2") to 16 penny (3-1/2") 21-2225 $12.95
Check all desired items then click 'Add to Cart'. To change quantity click the 'Modify Cart' button.

SharkGrip pry bars are the thinnest flat bars on the market. The tool is a combination pry bar / nail puller, and it's great for prying off molding with virtually no damage to the surrounding wall or the molding itself. Its super-thin design lets it slide into the narrowest cracks imaginable. It's perfect for aligning windows and doors during installation... removing carpet strips... staples... it even doubles as a multipurpose scraper, great for stripping away old paint and smoothing rough surfaces.

Hot Tool Deals!!!

Skil SPT67WM-22 Skilsaw

Skil SPT67WM-22 7-1/4" Sidewinder Skilsaw Special

PART#: SPT67WM-22
Add to Cart to See Price

See LARGER IMAGE

Diablo Demo Demon Reciprocating Saw Blade Special

9" Diablo Demo Demon Reciprocating Saw Blade 2 Pack Special

Two for the Price of One!

PART#: DS0906CWP
COST: $9.95

The Diablo Demo Demon Reciprocating Blades are specifically designed for maximum performance in nail-embedded wood. This 6 TPI high performance carbide tipped blade delivers 10X longer cutting life.

See LARGER IMAGE

Bosch Knife

Retractable Knife

PART#: H290B
COST: $12.95

Includes pouch.

See LARGER IMAGE

CH Hanson 03040 Magnetic Stud Finder

PART#: 03040
COST: $7.95

The 03040 Magnetic Stud Finder positively locates screws and steel studs with powerful rare earth magnets.

See LARGER IMAGE , MORE INFO

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $19.95

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.

See LARGER IMAGE , MORE INFO

100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.

See LARGER IMAGE , MORE INFO

SHOPPING INFORMATION

SUBTOTAL: $0.00

SHIPPING CALCULATOR
Add items to cart before calculating charges.

View Cart

Check Out
RELATED TOOLS
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools nsession