Flex XC 3401 VRG Car Polisher
The XC3401VRG Positive-Drive 6" Random Orbit (Dual Action) Car Polisher / Buffer
The XC3401VRG orbital rotation simulates the circular movement of the human hand while polishing. At the same time, the polisher's highly smooth running facilitates a careful, precise finish and even offers what is necessary for hologram-free polishing. That's just what this polisher, with its ergonomically designed knob handle, was made for. The positive drive ensures a uniform movement, even under load, thanks to constant lift. Taken in conjunction with the large stroke length there is also the possibility of removing existing holograms from black finishes. Thanks to the XC 3401 VRG direct orbital drive, very little heat develops on the surface, which is ideally suited to temperature-sensitive finishes. The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal speed.
See LARGER IMAGE
- XC 3401 VRG Polisher
- Grip Cover
- Knob Grip
- Special Velcro Backing Pad
Purchasing this item qualifies you for free FedEx ground shipping within the lower 48 states on your entire order.
- Rating: 120V AC
- Power Input: 900 Watts
- Power Output: 590 Watts
- Max Polishing Pad Diameter: 6.5"
- No-load OPM: 3,200 to 9,600
- No-load RPM: 160 to 480
- Weight: 5-3/4 lbs
- Flex XC3401VR microprocessor control: with tachogenerator constant speed control, soft start, continuous speed control trigger, restart protection after power failure, overload protection, temperature monitoring and speed selection.
- 8 mm orbit for high efficiency.
- Permanent direct drive for an even polished surface.
- Cushioned special hook and loop pad for polishing.
- Removable, ergonomic handle and guard for optimum handling in all applications.
- Low heat generation on the surface makes it ideal for temperature-sensitive paints.
- High-powered motor can handle extreme loads.
- Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage.
- Counterweight for quiet operation.
- Low height and low weight.
- Spindle lock.
- The bale handle can be positioned directly over the polisher's head or in front of it.
- The Flex XC3401VRG comes with a 13-foot power cord with Flex red plug.