Delta 37-365X Jointer
X5 DJ-20 8" Precision Jointer
The 37-365X includes 1-1/2 HP, 120/240 Volts (Wired 240 Volts), 60 Hz, single phase motor, 3-knife cutterhead module, cutterhead guard with wrenches, rabbeting ledge, tilting fence, push blocks, two pulleys.
Standard Equipment:
- Basic Machine
- Enclosed Stand w/1-1/2 HP Motor
- Set of 3 HSS Knives
- Cutterhead Module
- Cutterhead Guard
- Rabbeting Ledge
- Titling Fence
- Push Blocks
- Pulleys & Belt
- Instruction Manual
- Five-Year Warranty
Optional Accessories:
We Do Not Ship This Item
It can only be purchased at our store in West Hartford, CT.
PART#: 37-365X
COST: $1,650.00
COST: $1,650.00
Specifications:
- Motor: 1-1/2 HP, 115/230V
(wired 230),
60 Hz, Single-Phase, 3,450 RPM - Maximum Cutting Capacity...
Width: 8"
Depth: 5/8"
Rabbeting: 5/8"x 8-1/16" - Cutting Head...
Diameter: 3-3/8"
Number of Knives: 3
No-load RPM: 5,500 (16,500 CPM) - Table...
Overall Length: 76-1/2"
Outfeed: 32"
Infeed: 42"
Height from Floor: 32" - Fence...
Size: 5"x 36"
Tilt: 45° In & Out
Positive Stops: 90° & 45° In & Out - Size (LxWxH): 76"x 26"x 32"
- Weight: 335.0 lbs
Features:
- Unique parallelogram support system allows the table to move in the same area as the cutterhead when raised or lowered. This uniform close clearance to the cutting blade acts as a more efficient chip breaker. Table supports (4 on each table) are linear-extension spring counterbalanced; adjustment is virtually effortless despite weight of cast iron tables. Aluminum lips bolted to the main tables are replaceable to compensate for wear.
- The DJ-20s 8" cutting capacity is ample for the majority of wood widths available. Cast iron base assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and shavings. Large panels allow easy access inside the stand if adjustment or repair is necessary. Built-in chip chute is designed for hook-up to a dust collection system is required.
- Big 4"x 12" rabbeting ledge supports work securely right at the cutterhead. Note how center mounted fence acts as a rear guard when fence is moved forward to table edge.
- Specially designed cast iron fence is extra long for continued support throughout the cut. Fence is center mounted and functions as a rear guard on narrow cuts. Positive stops 45° in and out for accurate chamfering and beveling - scale in back measures angle set. Handy stock scale mounted at the end of fence measures jointed stock prior to planing.
- Extra long infeed table provides a full 42" of work support. Unique diamond ribbing insures that weight is best distributed throughout the length. Height adjustment level and locking handle facilitate repetitive jointing. Handy scale measures depth of cut in English or Metric for quick reference.
- Modular cutterhead provides a consistently clean cut. Three knives operate a 5500 RPM - 16,500 cuts per minute for a smooth finish. Cutterhead knives project only .020" above cutterhead surface to help reduce kickback of stock. Jack screw arrangmenet allows easy replacement and adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time.
