Hartford #62 Miter Clamp
The Hartford Miter Clamp is the only clamp that allows you to hold the joint tight after installation. If you have ever trimmed a door or window casing, you know that the joint can separate even if you glue and biscuit. After the casing is installed, simply lock the clamp in place flush with the casing and leave while the glue sets.
COST: $65.00
Comments:
This is the quickest, finest clamp made to set and clamp a miter. The work is held exactly square with this specially designed clamp. Used largely for making window and door casings either in production or installation. The eccentric lever pulls the work together giving the tightest possible joint. The small holes made by the pins are hardly noticeable and are easily filled.
This illustration shows the ease with which door casings are compactly and securely stacked with miter clamps attached. Clamps are quickly and easily removed without disturbing stack.
