Makita LXT601 18 Volt LXT 6-Tool Cordless Combo Kit
LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles.
Standard Equipment:
- LXT Hammer Drill
- LXT Impact Driver
- LXT Recipro Saw
- LXT 6-1/2" Circular Saw
- LXT Angle Grinder
- LXT Flashlight
- 2 LXT Lithium-Ion Batteries
- 30-Minute Rapid Charger
- Rolling Contractor Bag
PART#: LXT601
COST: $639.00
COST: $639.00
Specifications:
- Rating: 18.0 Volt
- Battery Capacity: 3.0 Amp-hr
LXT Hammer Drill
- No-load RPM: 0-400/0-1,500
- No-load BPM: 0-6,000/0-22,500
- Maximum Torque: 450 in-lbs
LXT Impact Driver
- No-load RPM: 0-2,300
- No-load IPM: 0-3,200
- Maximum Torque: 1,280 in-lbs
LXT Recipro Saw
- Stroke Length: 1-1/8"
- No-load RPM: 2,900
- Max Cutting Depth...
Pipe: 5-1/8"
Wood: 10"
LXT Circular Saw
- Blade Diameter: 6-1/2"
- No-load RPM: 3,700
- Max Cutting Depth...
at 90°: 2-1/4"
at 45°: 1-9/16"
at 50°: 1-7/16"
LXT Angle Grinder
- Grinding Wheel: 4-1/2"
- Cut-Off Wheel: 4-1/2"
- Wire Cup Brush: 3-1/2"
- Sanding Disc: 4-1/2"
- No-load RPM: 10,000
LXT Flashlight
- Run Time: 5 Hours/Charge
- Length: 11-1/8"
- Weight: 0.75 lbs w/Battery
Features:
- LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power).
- Rapid optimum charger quickly charges an 18V 3.0 Amp hour Li-Ion battery in only 30 minutes.
- Contractor bag designed with wheels and telescoping handle.
- 3-Year Warranty.
LXT Hammer Drill
- Makita built, 4-pole maximum torque motor delivers 450 in-lbs of efficient torque in a compact size.
- Shift-Lock drive system sleeve quickly shifts from "hammer drill" to "driver" mode.
- 2-Speed design (0-400/ 0-1,500) covers a wide range of drilling and driving applications.
LXT Impact Driver
- Makita built, 4-pole maximum torque motor delivers 1,280 in. lbs. of efficient torque in a compact size.
- 50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator fatigue.
- Makita's proprietary hammer and anvil are made using the highest quality steel and heat hardened to last longer.
LXT Recipro Saw
- Makita built, D35 high torque motor delivers 50% faster cutting with a 1-1/8" stroke that cuts 2,900 SPM.
- Compact design at only 19-5/8" length and weighs only 8.1 lbs. for less operator fatigue.
- Two built-in L.E.D. lights for more illuminated work.
- One-handed, fast tool-less blade changes and shoe adjustments.
LXT Circular Saw
- Makita built, D35 high torque motor delivers maximum power for cutting 2x material at 45 degree with 50 degree maximum capacity.
- Compact design at only 13-5/8" length and weighs only 7.1 lbs for less operator fatigue.
- Built-in dust blower enhances line of sight and keeps work piece clean.
- Two-piece armature and field along with externally accessible brushes for serviceability and longer motor life.
LXT Angle Grinder
- Makita built produces 50% faster grinding with an impressive 10,000 RPM.
- More compact design at only 12-1/2" long and weighs only 5.6 lbs for less operator fatigue.
- Built-in electronic control circuit with L.E.D. warning lights for overload protection.
- Slide switch with lock-on.
LXT Flashlight
- High illumination emits high power at 4,500 Lux
- New Xenon bulb for extra brightness.
- Runs up to 5 hours per charge.
