Makita DPC7321X1 14" Power Cutter Cut-Off Saw
See LARGER IMAGE
Standard Equipment:
- DPC7321 14" Power Cutter
- 14" Cut-off Wheel
- Universal Wrench
- Torx Wrench
- Screwdriver
- Adaptor Ring (22 mm to 1")
Optional Accessories:
Comments:
Due to emissions laws, this item cannot be shipped to California.
PART#: DPC7321
COST: $819.00
COST: $819.00
Specifications:
- Engine Displacement: 4.5 cu in (73cc)
- Max Power: 5.6 HP/4.2 kW
- No Load Speed: 9,350 RPM
- Fuel Mixture: 50:1
- Fuel Tank Capacity: 37 oz
- Max Spindle Speed: 4,300
- Wheel Diameter: 14"
- Arbor: 20mm
- Max Cutting Depth: 4-13/16"
- Weight: 22.0 lbs
Features:
- Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance.
- Reinforced aluminum blade guard with 70 degree range of limitless positioning using a marked knob handle.
- Improved ignition system with larger flywheel and rare earth magnets for more power.
- Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground.
- Starter grip and decompression valve located on the same side for faster starting.
- On-Off-Choke operating switch on a single lever for operator convenience.
- Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort.
- Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank.
- Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance.
