Freud Laminate Saw Blades
Industrial Series saw blades for the serious woodworker.
Saw blades recommended for the serious woodworker cutting chip board, plywood, laminate, melamines, etc.
- Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish.
- Laser-cut blade bodies, anti-vibration slots and expansion slots ensure a superior blade that remains straight and true cut after cut.
- Thick MicroGrain carbide tips allow for more cuts between sharpenings.
- Tri-metal brazing for impact-resistant tips ensuring long life.
10" Coated Precision Crosscut / Laminate Saw Blade
COST: $89.99
80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor.
Use for crisp, splinter-free and chip-free cuts in hard and soft woods.
Flawless finish in veneered plywood, melamines & laminates.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
10" Coated Single Sided Laminate / Wood Saw Blade
COST: $94.99
80 TCG tooth, 5° hook, 0.126" kerf, 5/8" arbor.
Long life, production blades for single-sided laminates, chip board and other manmade materials.
These are the blades of choice for countertop fabricators and laminate flooring installers.
Triple Chip Grind (TCG) tooth design will give excellent cuts in hard and soft wood and wood products.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
10" Coated Double Sided Laminate / Melamine Saw Blade
COST: $94.99
80 TCG tooth, -3° hook, 0.126" kerf, 5/8" arbor.
Ultra long life and excellent finish on the top and bottom of laminates, melamines, and veneered plywood.
Triple Chip Grind (TCG) tooth design with a negative hook angle provides superior life when cutting abrasive man-made materials.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
Free Shipping!
Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.
10" Coated Thin Kerf Double Sided Laminate / Melamine Saw Blade
COST: $69.99
80 TCG tooth, -3° hook, 0.091" kerf, 5/8" arbor.
Ultra long life and excellent finish on the top and bottom of laminates, melamines, and veneered plywood.
The thin kerf design is great for underpowered saws that need full kerf stability.
Triple Chip Grind (TCG) tooth design with a negative hook angle provides superior life when cutting abrasive man-made materials.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
