Diablo Saw Blades
by Freud
Diablo Saw Blades are specially designed to meet the needs of the construction and remodeling market.
- Diablo's thin kerf requires less power from your saw, so it's the perfect blade for portable tools.
- Laser-cut stabilizer vents for reduced vibration and precise cuts.
- Durable MicroGrain Titanium Carbide for razor sharp cuts and long life.
- PermaShield permanent coating prevents gumming and corrosion.
- Laser-cut thin kerf gives fast, clean cuts.
DIABLO BLADE INDEX
| FIBER CEMENT BLADES FRAMING BLADES RIPPING BLADES GENERAL PURPOSE BLADES FINE FINISH BLADES | ULTRA FINISH BLADES ULTIMATE FINISH BLADES COMBINATION BLADES FINISH BLADES SPECIALTY BLADES |
Diablo Fiber Cement Saw Blades
Diablo HardieBlade is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products.
Diablo Fiber Cement Blades generate up to 50% less respirable dust, while delivering the longest life in all fiber cement materials. Diablo PCD Hardieblades feature a unique, spark-eroded Triple Chip grind for long life - up to 60 times the life in fiber cement of conventional carbide blades Diablo PCD Hardieblades are perfect for full time use in heavy duty applications like cutting multiple pieces of fiber cement board.
See LARGER IMAGE
7-1/4" Diablo Hardie Blade
COST: $54.97
4 tooth TCG Polycrystalline Diamond Tipped, 10° hook, 0.081" kerf, 5/8" arbor.
See LARGER IMAGE
10" Diablo Hardie Blade
COST: $89.97
6 tooth TCG Polycrystalline Diamond Tipped, 10° hook, 0.071" kerf, 5/8" arbor.
See LARGER IMAGE
12" Diablo Hardie Blade
COST: $118.97
8 tooth TCG Polycrystalline Diamond Tipped, 10° hook, 0.087" kerf, 1" arbor.
Diablo Framing Saw Blades
Diablo framing blades provide exceptional long life in ripping and crosscutting applications.
7-1/4" Diablo Saw Blade
COST: $9.97
24 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor.
Diablo Ripping Saw Blades
The top choice for contractors who want a smooth finish when ripping. Ideal for ripping oak, pine, pressure treated lumber and plywood.
10" Diablo Saw Blade
COST: $27.97
24 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
Diablo General Purpose Saw Blades
The best choice for your miter saw, this blade leaves a smooth cut in a variety of applications. Ideal for cutting oak, pine, plywood, pressure treated lumber and beams.
10" Diablo Saw Blade
COST: $29.97
40 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
12" Diablo Saw Blade
COST: $34.97
44 tooth ATB, 15° hook, 0.098" kerf, 1" arbor.
Diablo Combination Saw Blades
The best choice for a table saw when one blade is needed for ripping and crosscutting.
10" Diablo Combination Saw Blade
COST: $36.99
50 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
See LARGER IMAGE
12" Diablo Combination Saw Blade
COST: $44.97
60 tooth Combination, 15° hook, 0.118" kerf, 1" arbor.
The best choice for miter and slide miter saws when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. This large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.
Diablo Finish Saw Blades
These blades leave a smooth finish when ripping and crosscutting 1X stock, decking, fencing and plywood. The ideal plywood blade.
7-1/4" Diablo Saw Blade
COST: $14.97
40 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor.
8" Diablo Saw Blade
COST: $28.86
40 tooth ATB, 15° hook, 0.094" kerf, 5/8" arbor.
Diablo Fine Finish Saw Blades
The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, plywood and moulding.
8-1/2" Diablo Saw Blade
COST: $41.97
60 tooth ATB, 7° hook, 0.087" kerf, 5/8" arbor.
Designed for sliding miter saws.
10" Diablo Saw Blade
COST: $39.90
60 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
12" Diablo Saw Blade
COST: $54.97
80 tooth ATB, 7° hook, 0.118" kerf, 1" arbor.
Designed for radial arm saws.
Diablo Ultra Finish Saw Blades
This Diablo ultra finish saw blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction. This blade leaves a smooth, velvety finish that requires little to no sanding. Ideal for cross-cutting oak, pine, melamine, veneer plywood and delicate moulding.
10" Diablo Saw Blade
COST: $49.97
80 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
Diablo Ultimate Finish Saw Blades
This Diablo ultimate flawless finish blades with Axial Shear Face Grind (ASFG) tooth geometry let trim crews get precise splinter free cuts on fine molding requiring no rework. The new ultra thin kerf allows portable job site saws to perform to the level of workshop stationary saws. This new innovation allows these blades to deliver energy efficiency & effortless cutting that users can feel. Diablo's Ultimate Flawless Finish blades are easy to use with less material waste.
10" Diablo Saw Blade
COST: $49.00
90 tooth ASFG, 10° hook, 0.087" kerf, 5/8" arbor.
12" Diablo Saw Blade
COST: $55.00
100 tooth ASFG, 7° hook, 0.098" kerf, 1" arbor.
Diablo Specialty Saw Blades
7-1/2" Diablo Non-Ferrous/Plastic Saw Blade
COST: $42.97
56 tooth TCG, -6° hook, 0.106" kerf, 5/8" arbor.
Ideal for cutting non-ferrous metals and plastic.
8" Diablo Steel Demon Ferrous Saw Blade
COST: $49.99
48 tooth TCG, 5/8" arbor.
Ideal for cutting steel studs, steel pipe, and steel sheet. For most mild steels under 1/8". Triple Chip Design for longer cutting life in metal.
10" Diablo Non-Ferrous Saw Blade
COST: $59.99
80 tooth TCG, -5° hook, 0.091" kerf, 5/8" arbor.
Use this Diablo saw blade for on-the-job cutting of non-ferrous metal such as copper pipe, aluminum extrusions, brass plate and plastics.
See LARGER IMAGE
10" Diablo Laminate/Melamine/Laminate Flooring Saw Blade
COST: $59.97
84 tooth TCG, -5° hook, 0.098" kerf, 5/8" arbor.
The thin kerf, Triple Chip Grind (TCG) Tooth Design is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock) and double-sided laminates and melamines cleanly, leaving a smooth finish with no tear out. Laminated materials are highly abrasive, so these blades feature a TiCo carbide blend ideally suited to harsh service. Note: laminate flooring should only be cut with a sliding miter saw or table saw (never with a chop style saw).
See LARGER IMAGE
12" Diablo Laminate/Melamine/Laminate Flooring Saw Blade
COST: $69.97
96 tooth TCG, -5° hook, 0.098" kerf, 1" arbor.
The thin kerf, Triple Chip Grind (TCG) Tooth Design is specially designed to cut laminate flooring (Pergo, Armstrong, Swiftlock) and double-sided laminates and melamines cleanly, leaving a smooth finish with no tear out. Laminated materials are highly abrasive, so these blades feature a TiCo carbide blend ideally suited to harsh service. Note: laminate flooring should only be cut with a sliding miter saw or table saw (never with a chop style saw).
12" Diablo Non-Ferrous Saw Blade
COST: $64.97
96 tooth TCG, -5° hook, 0.091" kerf, 1" arbor.
Use this Diablo saw blade for on-the-job cutting of non-ferrous metal such as copper pipe, aluminum extrusions, brass plate and plastics.
See LARGER IMAGE
14" Diablo Ferrous Saw Blade
COST: $99.00
72 tooth TCG, -2° hook, 0.114" kerf, 1" arbor.
This Steel Demon blade efficiently cuts through ferrous metals quickly and accurately leaving clean, burr free cuts. These blades feature teeth with Triple Chip Grind (TCG) and a special carbide blend with outstanding resistance to the high impact generated by steel cutting. Ideal for mild steel with a wall thickness of 1/4" or less.
