|
 |
|
Diablo Saw Blades by Freud |
Diablo Saw Blades are specially designed to meet the needs of the construction and remodeling market. |
 Diablo's thin kerf requires less power from your saw, so it's the perfect blade for portable tools.
Laser-cut stabilizer vents for reduced vibration and precise cuts.
Durable MicroGrain Titanium Carbide for razor sharp cuts and long life.
PermaShield permanent coating prevents gumming and corrosion.
Laser-cut thin kerf gives fast, clean cuts. |
WHAT'S ON THIS PAGE?
|
|
Diablo Framing Saw Blades |
 |
|
Diablo framing blades provide exceptional long life in ripping and crosscutting applications. |
 |
|
 |
|
PART#: D0724A
COST: $9.97 |
|
24 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor. | |
|
Diablo Ripping Saw Blades |
|
|
The top choice for contractors who want a smooth finish when ripping. Ideal for ripping oak, pine, pressure treated lumber and plywood. |
 |
|
|
|
|
PART#: D1024X
COST: $27.97 |
|
24 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. | |
|
Diablo General Purpose Saw Blades |
|
|
The best choice for your miter saw, this blade leaves a smooth cut in a variety of applications. Ideal for cutting oak, pine, plywood, pressure treated lumber and beams. |
 |
|
|
|
|
PART#: D1040X
COST: $29.97 |
|
40 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. | |
 |
|
|
|
|
PART#: D1244X
COST: $34.97 |
|
44 tooth ATB, 15° hook, 0.098" kerf, 1" arbor. | |
|
Diablo Combination Saw Blades |
|
|
The best choice for a table saw when one blade is needed for ripping and crosscutting. |
 |
|
|
|
|
PART#: D1050X
COST: $34.99 |
|
50 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. | |
|
Diablo Finish Saw Blades |
|
|
These blades leave a smooth finish when ripping and crosscutting 1X stock, decking, fencing and plywood. The ideal plywood blade. |
 |
|
|
|
|
PART#: D0740X
COST: $14.97 |
|
40 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor. | |
 |
|
|
|
|
PART#: D0840X
COST: $28.86 |
|
40 tooth ATB, 15° hook, 0.094" kerf, 5/8" arbor. | |
|
Diablo Fine Finish Saw Blades |
|
|
The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding.
Ideal for crosscutting oak, pine, melamine, plywood and moulding. |
 |
|
|
|
|
PART#: D0860S
COST: $41.97 |
60 tooth ATB, 7° hook, 0.087" kerf, 5/8" arbor.
Designed for sliding miter saws. | |
 |
|
|
|
|
PART#: D1060X
COST: $39.90 |
|
60 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. | |
 |
|
|
|
|
PART#: D1280X
COST: $54.97 |
80 tooth ATB, 7° hook, 0.118" kerf, 1" arbor.
Designed for radial arm saws. | |
|
Diablo Ultra Finish Saw Blades |
|
|
This Diablo ultra finish saw blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction.
This blade leaves a smooth, velvety finish that requires little to no sanding.
Ideal for cross-cutting oak, pine, melamine, veneer plywood and delicate moulding. |
 |
|
|
|
|
PART#: D1080X
COST: $49.97 |
|
80 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. | |
|
Diablo Specialty Saw Blades |
|
 |
|
|
7-1/2" Diablo Non-Ferrous/Plastic Saw Blade |
|
|
|
PART#: D0756N
COST: $37.50 |
56 tooth TCG, -6° hook, 0.106" kerf, 5/8" arbor.
Ideal for cutting non-ferrous metals and plastic. |
|
 |
|
|
8" Diablo Steel Demon Ferrous Saw Blade |
|
|
|
PART#: D0848F
COST: $42.50 |
48 tooth TCG, 5/8" arbor.
Ideal for cutting steel studs, steel pipe, and steel sheet. For most mild steels under 1/8". Triple Chip Design for longer cutting life in metal. |
|
 |
|
|
10" Diablo Non-Ferrous Saw Blade |
|
|
|
PART#: D1080N
COST: $52.50 |
80 tooth TCG, -5° hook, 0.091" kerf, 5/8" arbor.
Use this Diablo saw blade for on-the-job cutting of non-ferrous metal such as copper pipe, aluminum extrusions, brass plate and plastics. |
|
 |
|
|
12" Diablo Non-Ferrous Saw Blade |
|
|
|
PART#: D1296N
COST: $64.99 |
96 tooth TCG, -5° hook, 0.091" kerf, 1" arbor.
Use this Diablo saw blade for on-the-job cutting of non-ferrous metal such as copper pipe, aluminum extrusions, brass plate and plastics. |
|
|
