Vacuum accessories for the 9-20-26 Turbo III and 9-20-26-FB Turbo III vacuum / dust extractor. Also used with discontinued Turbo III's.
FEIN TURBO III ACCESSORY INDEX
The High Efficiency Particulate Air (HEPA) filter increases filtration to 99.976% of all
particles 0.3 microns in size and larger. Includes a flange and screw for mounting.
Click T11HEPA Filter for more info.
Increases filtration to 99.97% of all particles 1 micron and over. Includes a flange and screw for mounting.
Click T111MCRN Filter for more info.
Used with the filter screw to attach either a 1 micron or HEPA filter on to the Turbo III vacuum. Included with the filters listed above.
Click T113002 Filter Flange for more info.
Used with the filter flange to attach either a 1 micron or HEPA filter on to the vacuum. Included with the filters listed above.
Click T113001 Filter Screw for more info.
Keeps debris from spreading inside the tank. Cannot be used with the 5 Micron filter. You must use a bag when using either a 1 Micron filter or the HEPA filter.
Click Turbo III Dust Bags for more info.
See LARGER IMAGE
For use with the discontinued 9-77-25 Turbo III Vacuum and has a 13" outer diameter rim. Sits in the bottom of the vac container and will contain 99.97% of all particles 5 micron and over.
Click 913064AGA6 Cloth Filter for more info.
For use with the new 9-20-26 Turbo III Vacuum and has a 14-7/8" outer diameter rim. Sits in the bottom of the container and will contain 99.97% of all particles 5 micron and over.
Click 913079AGA6 Cloth Filter for more info.
Used in place of all other filters when operating the vac in a wet application.
Click 902042000 Wet Filter for more info.
A more convenient hose when using a hand-held power tool or as a second hose for running two power tools. You will need a Flex Hose End Adaptor (#921069A13) or a Vac Step Adaptor (#921072K13) to connect to a hand-held power tool.
HINT: Connect two 16' hose using a Vac Step Adaptor to make one 32' hose!
This clip attaches the power tool cord to a 1-1/4" diameter hose (#921049GN1 - standard equipment with the Turbo II) to prevent entanglement.
Click 921063K13 Hose Clip for more info.
This is a replacement hose for the 10' x 2-1/4" hose supplied with the Turbo III Vac. Can be used as a second hose for running two tools.
Click 921120AG13 Hose for more info.
Operate Two Tools Off One Turbo III Vacuum!
This adaptor connects directly into the vacuum port of the Turbo III. Can be used with just one tool by closing one of its ports.
Click 921086AA13 Y Connector with Cap for more info.
Used to connect a 1-1/4" diameter vacuum hose to power tools with a 1-1/4" port. One is included with the Turbo III Vac as standard equipment.
Click 921069A13 Adaptor for more info.
Used to connect a power tool with a port diameter other than 1-1/4" to a 1-1/4" diameter hose. Determine the fit
you need and then cut the adaptor. A very handy device to have around the shop. Almost as handy as duct tape.
Click 921072K13 Step Adaptor for more info.
Connects a 2-1/4" diameter hose to most portable tools with a 1-1/4" diameter port.
Click 921005AK13 Vacuum Adaptor for more info.
Connects a 1-1/4" diameter hose to most benchtop machines with a 2-1/4" port.
The Fein Powerbrush can be used to turn any auto start vac into an upright style house vacuum. Just plug the Powerbrush cord into the front of the
vac and put the switch in "auto" position and lower the handle. The power head is self propelled and has a 13" cleaning width with a dual agitator
rotating at 1600 beats per minute. The Powerbrush turns on when the handle is released from its upright position. The Powerbrush includes a suction
reducing handle, two extension tubes, cable clamps, and 22' cord.
Click PB350 PowerBrush Kit for more info.
This kit turns your Turbo III vacuum into a shop style vac. Includes 2 extension tubes, handle with built-in suction force reducer,
crevice nozzle, upholstery nozzle, furniture brush, floor nozzle (nozzle body and fluid & floor frame) and an
anti-foam filter (for wet vacuuming).
Click DW3 Wet-Dry Clean-Up Kit for more info.
USED ONLY WITH THE MULTIMASTER RS & XL KITS
This adaptor allows the MultiMaster to connect to any Fein vacuum. A step adaptor (#921072K13) might be needed to connect to other brands of vacs.
Click 92602063023 Dust Extraction Kit for more info.
Allows the MultiMaster to connect to a vacuum for totally dust-free sanding.
Click 92602081010 Dust Extraction Kit for more info.
See all the Sanding Accessories we stock.
Hot Tool Deals!!!
Performance Tool LED Flashlight
Bright, LED flashlight with black body and rubber on/off push button. Ideal for pocket, glove or tool box. Includes 3 AAA batteries.
See LARGER IMAGE
Milwaukee 90 Pc Drill & Drive Set
This Quik-Lok bit system allows users to change drilling and driving accessories quickly and easily.
CH Hanson 03040 Magnetic Stud Finder
The 03040 Magnetic Stud Finder positively locates screws and steel studs with powerful rare earth magnets.
See LARGER IMAGE ,
LeadCheck Instant Lead Testing Swabs
Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.
100 Pc Master Screwdriver Bit Set
Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.
Add items to cart before calculating charges.
9-20-26 Turbo III Vac
9-20-26-FB Turbo III Vac
No Promo Codes are available at this time