 |
YOUR COST:
$%%product(FEIN955-13FB).Price%%
 |
 |
|
 |
%%SoftCart.product(FEIN955-13FB).Stock%%


Standard Equipment
Fein Turbo II Vacuum
16'x 1-1/4" Hose
Flex Adaptor
1 Micron Filter
Filter Flange & Screw
Turbo II Vac Dust Bag
Shipping Note: The hose, adaptor and caster wheels are packaged inside the vacuum under the filter.

Optional Accessories
Turbo II Vac Accessories |
 |
The Perfect Turbo II Kit For Fine Dust Applications!

Specifications
Nominal Power: 1,050 Watts
Air Flow: 116 CFM
Static Water Lift: 90"
Capacity with Solids: 9.0 gallons
Capacity with Fluids: 6.8 gallons
Noise Level: 57.8 decibels at 3.5'
Weight: 28.6 lbs
Dimensions: 15.7"x16.5"x24.8"

Features
The 1 micron filter, used with the dust bag, increases filtration to 99.97% of all particles 1 micron and over.
Can be used as a wet vac with optional anti-foam filter.
Turbo Cooling Technology uses a dual fan motor to prevent electrical damage and extend the life of the motor.
Auto-Trigger Starting starts vacuum automatically when connected tool is switched on.
Operates at a very quiet 57.8 dB(A) noise level at 31/2'.

Comments
The Turbo II is a very quiet vacuum (57.8 decibels at 3.5 feet) that can also be outfitted for HEPA filtration.
The Turbo Cooling Technology design means one fan is sealed and creates suction to draw
in air and debris, filter it and exhaust it. The second fan draws cooling air from the outside
and across the motor. This technique assures the motor will never be starved for cooling air or
exposed to dirt and grime in the tank even if the hose and filter are blocked.
This vac also features Auto-Trigger Starting. Plug any hand-held tool into the
Fein Turbo II's faceplate, set the switch to Auto, and the vacuum will start automatically when
the tool is switched on. Turning the tool off also turns off the vacuum. The vac will
handle all power tools with inputs of 40 to 2000 Watts (.3 - 19 Amps). |