Fein Turbo I Vacuum Accessories

HEPA Filter with Hardware

The High Efficiency Particulate Air (HEPA) filter increases filtration to 99.976% of all particles 0.3 microns in size and larger. Includes a flange and screw for mounting.

Click T11HEPA Filter for more info.

1 Micron Filter with Hardware

Increases filtration to 99.97% of all particles 1 micron and over. Includes a flange and screw for mounting.

Click T111MCRN Filter for more info.

Filter Flange

Used with the filter screw to attach either a 1 micron or HEPA filter on to the Turbo I Vac. Included with the filters listed above.

Click T113002 Filter Flange for more info.

Filter Screw

Used with the filter flange to attach either a 1 micron or HEPA filter on to the vacuum. Included with the filters listed above.

Click T113001 Filter Screw for more info.

Turbo I Vac Dust Bag - 3 Pack

Keeps debris from spreading inside the tank. Cannot be used with the 5 Micron filter. You must use a bag when using a 1 micron or HEPA filter.

Click Turbo I Dust Bags for more info.

5 Micron Cloth Filter - 9-11-55 Turbo I

For use with the discontinued 9-11-55 Turbo I Vacuum and has a black rim. Sits in the bottom of the container and will contain 99.97% of all particles 5 micron and over.

Click 913022GA5 Cloth Filter for more info.

5 Micron Cloth Filter - 9-20-24 Turbo I

For use with the new 9-20-24 Turbo I Vacuum. Sits in the bottom of the container and will contain 99.97% of all particles 5 micron and over.

Click 913079AGA6 Cloth Filter for more info.

Anti-Foam Wet Filter

Used in place of all other filters when operating the vac in a wet application.

Click 902042000 Wet Filter for more info.

16' x 1-1/4" Hose

This is a longer replacement hose for the 10-1/2' hose supplied with the Turbo I Vac. Can be used as a second hose for running two tools. You will need another Flex Hose End Adaptor (#921069A13) or a Vac Step Adaptor (#921072K13) to connect the second power tool. HINT: Connect a 16' hose to the 10-1/2' hose supplied with the Turbo I (or another 16' hose) using a Vac Step Adaptor to make a longer hose!

Click 921049GN1 16' Hose for more info.

Hose Clip

This clip attaches the power tool cord to the 1-1/4" diameter hose to prevent entanglement.

Click 921063K13 Hose Clip for more info.

Flex Hose End Adaptor

Used to connect a 1-1/4" diameter vacuum hose to power tools with a 1-1/4" port.

Click 921069A13 Adaptor for more info.

Vac Step Adaptor

Used to connect a power tool with a port diameter other than 1-1/4" to a 1-1/4" diameter hose. Determine the fit you need and then cut the adaptor. A very handy device to have around the shop. Almost as handy as duct tape.

Click 921072K13 Step Adaptor for more info.

2-1/4" to 1-1/4" Adaptor

Connects a 2-1/4" diameter hose to most portable tools with a 1-1/4" diameter port.

Click 921005AK13 Vacuum Adaptor for more info.

10' x 2-1/4" Hose

The larger diameter connects directly to benchtop machines with a 2-1/4" diameter port without adaption.

Click 921120AG13 Hose for more info.

1-1/2" O.D. to 2-1/4" O.D. Benchtop Adaptor

Connects a 1-1/4" diameter hose to most benchtop machines with a 2-1/4" port.

Crevice Nozzle

Upholstery Nozzle

Round Brush Nozzle

Floor Nozzle Body

Combine the floor nozzle body with the following inserts to suit the application.

Carpet Brush Insert

Bare Floor Insert

Wet Floor Insert

Floor Brush with Wheels

Chrome Extension Tube

Recommended to buy 2 for easiest operation.

Air Flow Handle

PowerBrush Kit

The Fein Powerbrush can be used to turn any auto start vac into an upright style house vacuum. Just plug the Powerbrush cord into the front of the vac and put the switch in "auto" position and lower the handle. The power head is self propelled and has a 13" cleaning width with a dual agitator rotating at 1600 beats per minute. The Powerbrush turns on when the handle is released from its upright position. The Powerbrush includes a suction reducing handle, two extension tubes, cable clamps, and 22' cord.

Click PB350 PowerBrush Kit for more info.

Wet-Dry Vac Accessory Kit

This kit turns your Turbo I vacuum into a shop style vac. Includes 2 extension tubes (metal), crevice nozzle, upholstery attachment, furniture brush, hand grip with air control, floor brush, wet floor brush and an anti-foam filter (for wet vacuuming).

Click DW1 Wet-Dry Clean-Up Kit for more info.

MultiMaster Dust Extractor Adaptor Kit

USED ONLY WITH THE MULTIMASTER RS & XL KITS
This adaptor allows the MultiMaster to connect to any Fein vacuum. A step adaptor (#921072K13) might be needed to connect to other brands of vacs.

Click 92602063023 Dust Extraction Kit for more info.

MultiMaster FMM250 Dust Extraction Kit

Allows the MultiMaster to connect to a vacuum for totally dust-free sanding.

Click 92602081010 Dust Extraction Kit for more info.

See all the Sanding Accessories we stock.