|
|
 |
|
Fein SuperCut Sanding & Polishing Accessories |
WHAT'S ON THIS PAGE?
 |
 |
 |
IMPORTANT
Hex-to-Star Mount Adapter
|
 |
PART#: 30605114011
COST: $28.50 |
|
Needed for connecting the Supercut's hex mount to all accessories on this page. The Supercut Kits for Tile and Carpentry both include this adapter. | |
|
Supercut Triangular Sanding |
 |
 |
 |
Triangular Sandpaper
For universal use on almost all materials such as wood, metal,
fiberglass, plastic, paint, filler, welds, leather, etc. Hook & loop-backed for use with hook & loop pads. |
|
 |
 |
Triangular Sanding Pads
Offered in a variety of thicknesses to be used with triangular sanding sheets. For use with hook & loop sanding sheets. |
|
 |
 |
Plastic-Backed Triangular Sanding Pads 2 Pack
|
 |
 |
PART#: 63806153022
COST: $22.50 |
|
For use with the hook & loop sanding sheets, stone sanding sheets and polishing pads. Resists bending when extra pressure is applied.
This pad also prevents scratches when sanding next to delicate surfaces. | |
|
Supercut Finger Sanding |
 |
 |
 |
Hook & Loop Finger Sandpaper
For use with the finder pads on wood, metal, welds, fiberglass, plastic, paint, filler, and leather. Hook & loop-backed. |
|
 |
 |
Hook & Loop Finger Pads
Slender and long finger for use in very narrow and low areas, in creases, grooves, openings and folds. Can be bent to fit the work place. |
|
|
Supercut Polishing Pads |
 |
 |
 |
|
Felt Polishing Pad - 2 Pk
|
 |
 |
PART#: 63806140027
COST: $35.00 |
|
For polishing metal parts such as brass fittings, navigational instrument
casings or parts made of steel. You can also polish heavily-worn gel coat layers. | |
|
Supercut Carbide Rasps |
 |
 |
 |
|
Carbide Triangular Rasp - 1 Pk
|
 |
 |
PART#: 63731001014
COST: $44.50 |
Hard-alloy tipped for aggressive removal on wood, stone and concrete.
It produces 5 times the sanding performance of 40-grit paper, but won't load up with residue. | |
 |
 |
Carbide Finger Rasp 1 Pack
|
 |
 |
PART#: 63731002017
COST: $44.50 |
|
The finger rasp is useful for extremely tight areas that the standard rasp can't fit into.
Only 1-1/8" wide, with a narrow point. With carbide coating on both sides. | |
|