Fein MultiMaster Tile Blades, Diamond Blades, Rasps

MultiMaster Carbide Blades

Fein MultiMaster Tile Blades Grout removing carbide saw blades are the easiest, neatest way to remove broken tiles. The blade grinds out the grout and isolates the broken tile for easy removal. The blades are available in three different widths to accommodate most any tile installation. Use our grout blades to skim out old grout for replacement. Stretch your renovation and remodeling dollars by replacing stained and cracked grout with new grout at a fraction of the cost. Try using our Diamond Blades for particularly tough grout jobs. Grout blades are also excellent for cutting plaster.

See the MultiMaster Accessory Kits for money saving assorments.

Fein MultiMaster Segmented Recessed Carbide Blade

2-1/2"x 3/32" Segmented Recessed Carbide Blade - 1 Pk

PART#: 63502118016
COST: $22.50

This blade quickly grinds out grout without damaging surrounding tiles. This blade has one flat side so you can cut to corners or adjoining surfaces without over-cutting.

2-1/2"x 3/32" Segmented Recessed Carbide Blade - 3 Pk

PART#: 63502118060
COST: $57.50

2-1/2"x 3/32" Segmented Recessed Carbide Blade - 10 Pk

PART#: 63502118070
COST: $179.00
Fein MultiMaster Thin Carbide Tile Blade

2-1/2"x 1/16" Recessed Carbide Blade - 1 Pk

PART#: 63502125010
COST: $21.50

This blade is designed specifically for thin grout lines. Removes grout without damaging surrounding tiles. Also used for plunge cutting into drywall and cutting porous concrete blocks.

Fein MultiMaster Thick Carbide Tile Blade

2-1/2"x 5/32" Recessed Carbide Blade - 1 Pk

PART#: 63502128015
COST: $24.50

This grout-removing blade is designed for thick grout lines. Also used for plunge cutting into drywall and cutting porous concrete blocks.

3-1/2"x 3/64" Segmented Recessed Carbide Blade - 1 Pk

PART#: 63502170010
COST: $34.50

For cutting out defective tile joints and cutting grooves in plaster, porous concrete and similar construction materials.

3-1/2"x 3/32" Segmented Recessed Carbide Blade - 1 Pk

PART#: 63502169010
COST: $34.50

For cutting out defective tile joints and cutting grooves in plaster, porous concrete and similar construction materials.

3-1/2"x 5/32" Segmented Recessed Carbide Blade - 1 Pk

PART#: 63502171010
COST: $34.50

For cutting out defective tile joints and cutting grooves in plaster, porous concrete and similar construction materials.

MultiMaster Diamond Blades

Fein MultiMaster Tile Blades For commercial applications such as cutting out marble and trass concrete joints. Also for sinking ducts in plaster, brick, pumice and honeycomb stone as well as autoclaved aerated concrete. These premium, long lasting blades are designed specifically for harder grouts.

See the MultiMaster Accessory Kits for money saving assorments.

Fein MultiMaster Diamond Blade

Diamond Grout Blade - 1 Pk

PART#: 63502105012
COST: $52.50

This diamond blade is flat and has a full cutting surface. 2-1/2" diameter.

Fein MultiMaster Segmented Diamond Blade

2-1/2" Segmented Recessed Diamond Grout Blade - 1 Pk

PART#: 63502114017
COST: $52.50

This diamond blade has one flat side so you can cut corners or adjoining surfaces without over cutting. 2-1/2" diameter.

MultiMaster Carbide Rasps

Fein MultiMaster Rasps Fein's carbide coated rasps are aggressive, and the fastest way to remove material using the MultiMaster. It produces five times the sanding performance of 40 grit paper, but resists loading up with sanding residue. Use our rasps to remove thin set mortar, paint, oil stains or graffiti from a number of different surfaces. For large surfaces, use out standard carbide rasp, and for those tight areas, we recommend the finger carbide rasp.

See the MultiMaster Accessory Kits for money saving assorments.

Fein MultiMaster Carbide Rasp

Carbide Triangular Rasp - 1 Pk

PART#: 63731001014
COST: $19.00

Hard-alloy tipped for aggressive removal on wood, stone and concrete. It produces 5 times the sanding performance of 40-grit paper, but won't load up with residue. Can also be used with our Dust Extraction Kit.

Fein MultiMaster Finger Rasp

Carbide Finger Rasp - 1 Pk

PART#: 63731002017
COST: $21.50

The finger rasp is useful for extremely tight areas that the standard rasp can't fit into. Only 1-1/8" wide, with a narrow point. With carbide coating on both sides.

MultiMaster Adapters & Screws

Fein MultiMaster 4-Star Apdater

4-Star Apdater

PART#: 30109189010
COST: $8.75

USED ONLY WITH THE MULTIMASTER RS & XL KITS
Use this adapter to take advantage of the benefits of the new accessory mount system with an old-style MultiMaster holder. The bottom side has 4-star male mount that fits securely into the newly designed accessories, the top side is carbide coated to prevent slipping in the old-style MultiMaster mount.

Fein MultiMaster 4-Star Apdater

MultiMaster Replacement Screw Set

PART#: 43033087065
COST: $9.75

USED ONLY WITH THE MULTIMASTER RS & XL KITS
Replacement screw set includes one screw for pads and one screw for blades.

Hot Tool Deals!!!

Bosch Knife

Retractable Knife

PART#: H290B
COST: $12.95

Includes pouch.

See LARGER IMAGE

CH Hanson 03040 Magnetic Stud Finder

PART#: 03040
COST: $7.95

The 03040 Magnetic Stud Finder positively locates screws and steel studs with powerful rare earth magnets.

See LARGER IMAGE , MORE INFO

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $19.95

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.

See LARGER IMAGE , MORE INFO

100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.

See LARGER IMAGE , MORE INFO

SHOPPING INFORMATION

SUBTOTAL: $0.00

SHIPPING CALCULATOR
Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools nsession