Fein Mini Turbo Vacuum Accessories

HEPA Filter with Hardware

The High Efficiency Particulate Air (HEPA) filter increases filtration to 99.976% of all particles 0.3 microns in size and larger. Includes a flange and screw for mounting.

1 Micron Filter with Hardware

Increases filtration to 99.97% of all particles 1 micron and over. Includes a flange and screw for mounting. The Mini-Turbo includes one of these filters as standard equipment.

Filter Flange

Used with the filter screw to attach either a 1 micron or HEPA filter on to the Mini-Turbo Vac. Included with the filters listed above.

Filter Screw

Used with the filter flange to attach either a 1 micron or HEPA filter on to the vacuum. Included with the filters listed above.

Mini-Turbo Vac Dust Bag - 3 Pack

Keeps debris from spreading inside the tank. Cannot be used with the 5 Micron filter. You must use a bag when using a 1 micron or HEPA filter.

5 Micron Cloth Filter

Sits in the bottom of the container and will contain 99.97% of all particles 5 micron and over.

Anti-Foam Wet Filter

Used in place of all other filters when operating the vac in a wet application.

16' x 1-1/4" Hose

This is a longer replacement hose for the 10-1/2' hose supplied with the Mini-Turbo Vac. Can be used as a second hose for running two tools. You will need another Flex Hose End Adaptor (#921069A13) or a Vac Step Adaptor (#921072K13) to connect the second power tool. HINT: Connect a 16' hose to the 10-1/2' hose supplied with the Mini-Turbo (or another 16' hose) using a Vac Step Adaptor to make a longer hose!

Hose Clip

This clip attaches the power tool cord to the 1-1/4" diameter hose to prevent entanglement.

Hose Cradle

Attaches to the side of Fein vacuums and allows a hose to be easily wrapped around the vacuum. Two (2) suggested.

Flex Hose End Adaptor

Used to connect a 1-1/4" diameter vacuum hose to power tools with a 1-1/4" port.

Vac Step Adaptor

Used to connect a power tool with a port diameter other than 1-1/4" to a 1-1/4" diameter hose. Determine the fit you need and then cut the adaptor. A very handy device to have around the shop. Almost as handy as duct tape.

2-1/4" to 1-1/4" Adaptor

Connects a 2-1/4" diameter hose to most portable tools with a 1-1/4" diameter port.

10' x 2-1/4" Hose

The larger diameter connects directly to benchtop machines with a 2-1/4" diameter port without adaption.

1-1/2" O.D. to 2-1/4" O.D. Benchtop Adaptor

Connects a 1-1/4" diameter hose to most benchtop machines with a 2-1/4" port.

Crevice Nozzle

Upholstery Nozzle

Round Brush Nozzle

Floor Nozzle Body

Combine the floor nozzle body with the following inserts to suit the application.

Carpet Brush Insert

Bare Floor Insert

Wet Floor Insert

Floor Brush with Wheels

Chrome Extension Tube

Recommended to buy 2 for easiest operation.

Air Flow Handle

MultiMaster Dust Extractor Adaptor Kit

USED ONLY WITH THE MULTIMASTER RS & XL KITS
This adaptor allows the MultiMaster to connect to any Fein vacuum. A step adaptor (#921072K13) might be needed to connect to other brands of vacs.