Fein Supercut FSC 2.0-CK with Carpentry Kit
When circular saws, jigsaws or reciprocating saws just won't cut it and a chisel means considerable manual labor, the Fein SuperCut with Carpentry Kit bites through effortlessly and in record time. No free space is required alongside or behind the work piece. Often saving laborious dismantling. Even difficult-to-reach areas can be worked as the E-Cut blades can be mounted at right-angles to the SuperCut. The Fein E-Cut sawing system will speed progress on any construction site.
- SuperCut FSC 2.0
- Carpentry Kit:
4 E-Cut Precision Saw Blades
Widths: 35, 45, 55, 65mm
2 E-Cut Standard Saw Blades
Widths: 35 & 65mm
2 E-Cut Long Saw Blades
Widths: 32 & 42mm
1 Triangular Sanding Pad
15 Sheets Sanding Paper
5 Each: 60, 80, 120 Grit
1 Hex-to-Round Mount Adapter
- Deluxe Carrying Case
New model coming soon.
- Rating: 120 V, 3.3 Amps
- Power Input: 400 Watts
- Power Output: 220 Watts
- No-load OPM: 11,000 to 18,500
- Weight: 3.2 lbs
- The Fein SuperCut has a high-performance 400 Watt motor for rapid working progress in all fields of application.
- This heavy duty tool oscillates 4 degrees at 18,500 strokes per minute.
- Drive with oil-bath lubrication for long life.
- Blades fit onto a twelve-position-splined shaft for efficient power transmission and exact positioning.
- Rapid cutting and removal of a wide variety of materials.
Carpentry Kit Applications
Precision cut-outs are possible at any time. You can even saw hand-held sections precisely and with minimal vibrations.
Removing paint and giving surfaces a final sanding down, the triangular shape of the sanding pad means you will be able to reach into every corner and angle for detail sanding.
High Speed Cutting
Cutting plasterboard to shape and producing cut-outs is achieved with high cutting speed, yet with significantly less dust generation then is the case with other saws.
Adjusting Door Jambs
Door jambs can now be precisely trimmed with the E-Cut saw blades, because the cropped shaped enables you to work flush to surfaces. The often tricky cutouts required when renovating old buildings also presents no problem.
Deep Notching & Plunge Cutting
The long E-Cut saw blades can be used to cut deep notches and grooves. Just like with a mortise chisel, you can plunge straight into the material.