Dremel Multi-Max Sanding Accessories
Sandpaper and pads for various sanding applications.
For use with the Multi-Max 6300-01.
MULTI-MAX SANDING INDEX
| SANDPAPER | SANDING PAD |
Multi-Max Sandpaper
Multi-Max MM70W Assorted Sandpaper - Wood
Sandpaper accessory allows the Multi-Max to be used for sanding hardwood, softwood, chipboard, rusted metal, fiberglass and plastics. Requires MM11 Hook and Loop Pad accessory.
COST: $5.00
Specifications:
- Grit: 60, 120, 240
Features:
- Use 60 grit for rough wood or metal sanding, and rust or old finish removal.
- Use 120 grit for general wood or metal sanding.
- Use 240 grit for final finishing of wood, metal, plaster and other surfaces.
Comments:
Work with the complete surface of the sanding pad, not only the tip. Corners may be finished using the tip or edge of the selected accessory, which should occasionally be rotated during use to distribute the wear on the accessory and backing pad surface. Do not apply excessive pressure - let the tool do the work. Always be certain that smaller workpieces are securely fastened to a bench or other support.
Multi-Max MM70P Assorted Sandpaper - Paint
Sandpaper accessory allows the Multi-Max to sand paint, varnish, filling compound on a variety of surfaces. Requires MM11 Hook and Loop Pad accessory.
COST: $5.00
Specifications:
- Grit: 80, 120, 240
Features:
- Use 80 grit for sanding off paint.
- Use 120 grit for sanding primer, removing brush strokes and paint runs and drops.
- Use 240 grit for final sanding of primers before coating.
Comments:
Work with the complete surface of the sanding pad, not only the tip. Corners may be finished using the tip or edge of the selected accessory, which should occasionally be rotated during use to distribute the wear on the accessory and backing pad surface. Do not apply excessive pressure - let the tool do the work. Always be certain that smaller workpieces are securely fastened to a bench or other support.
Multi-Max MM900 60 Grit Diamond Sandpaper
Diamond paper accessory allows the Multi-Max to be used for grinding cement, plaster or thin-set mortar. Requires MM11 Hook and Loop Pad accessory.
COST: $32.50
Specifications:
- Grit: 60
Features:
- For rough grinding, shaping and smoothing of masonry, stone, cement and mortar. Preparing the surface for tile replacement is a common application for this accessory.
Comments:
Corners may be finished using the tip or edge of the selected accessory, which should occasionally be rotated during use to distribute the wear on the accessory and backing pad surface. Do not apply excessive pressure - let the tool do the work. Select a low to high speed depending on the material removal rate desired.
Multi-Max Sanding Pad
Multi-Max MM11 Hook and Loop Pad
Hook and loop pad accessory allows the Multi-Max oscillating tool to accept Sandpapers and diamond Sandpaper.
COST: $7.50
Comments:
Work with the complete surface of the sanding pad, not only the tip. Do not apply excessive pressure - let the tool do the work. Corners may be finished using the tip or edge of the selected accessory, which should occasionally be rotated during use to distribute the wear on the accessory and backing pad surface. Always be certain that smaller workpieces are securely fastened to a bench or other support.
