 |
 |
We DO NOT SHIP this
item. It can only be
purchased at our store
in West Hartford, CT.
 |
|
|
|
Standard Equipment
 Basic Machine
Enclosed Stand w/11/2 HP Motor
Set of 3 HSS Knives
Cutterhead Module
Cutterhead Guard
Rabbeting Ledge
Titling Fence
Push Blocks
Pulleys & Belt
Instruction Manual
Five-Year Warranty
Accessories
Machine Covers
Mobile Bases
Roller Supports |
|
Specifications
Motor: 11/2 HP, 115/230V
(wired 230),
60 Hz, Single-Phase, 3,450RPM
Maximum Cutting Capacity...
Width: 8"
Depth: 5/8"
Rabbeting: 5/8"x 81/16"
Cutting Head...
Diameter: 33/8"
Number of Knives: 3
No-load RPM: 5,500 (16,500 CPM)
Table...
Overall Length: 761/2"
Outfeed: 32"
Infeed: 42"
Height from Floor: 32"
Fence...
Size: 5"x 36"
Tilt: 45° In & Out
Positive Stops: 90° & 45° In & Out
Size (LxWxH): 76"x 26"x 32"
Weight: 335.0 lbs
Features
Unique parallelogram support system allows the table to move in the same area as the cutterhead when raised or lowered.
This uniform close clearance to the cutting blade acts as a more efficient chip breaker. Table supports (4 on each table) are linear-extension spring counterbalanced; adjustment is virtually
effortless despite weight of cast iron tables. Aluminum lips bolted to the main tables are replaceable to compensate for wear.
The DJ-20s 8" cutting capacity is ample for the majority of wood widths available. Cast iron base assures less vibration;
cabinet stand completely encases motor and pulleys to protect from dust and shavings. Large panels allow easy access inside the stand if adjustment or repair is necessary. Built-in chip chute
is designed for hook-up to a dust collection system is required.
Big 4"x 12" rabbeting ledge supports work securely right at the cutterhead. Note how center mounted fence acts as a rear guard
when fence is moved forward to table edge.
Specially designed cast iron fence is extra long for continued support throughout the cut. Fence is center mounted and
functions as a rear guard on narrow cuts. Positive stops 45° in and out for accurate chamfering and beveling - scale in back measures angle set. Handy stock scale mounted at the end
of fence measures jointed stock prior to planing.
Extra long infeed table provides a full 42" of work support. Unique diamond ribbing insures that weight is best distributed
throughout the length. Height adjustment level and locking handle facilitate repetitive jointing. Handy scale measures depth of cut in English or Metric for quick reference.
Modular cutterhead provides a consistently clean cut. Three knives operate a 5500 RPM - 16,500 cuts per minute for a smooth finish.
Cutterhead knives project only .020" above cutterhead surface to help reduce kickback of stock. Jack screw arrangmenet allows easy replacement and adjustment of individual knives.
In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time. |
