Table Saw Specialty Blades
10" Thin Stock Nonferrous Metal Saw Blade
100 TCG tooth, 5° hook, 0.110" kerf, 5/8" arbor. For producing smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metals. Designed specifically to cut thin, nonferrous metal extrusions such as aluminum storm window frames without damaging the delicate profiles. The high number of specially formulated MicroGrain carbide tips and the slightly positive hook angle allow these blades to slice quickly and cleanly through the material without binding. Freud recommends ample use of a liquid lubricant when cutting. This can be accomplished with a squirt of WD-40 or other lubricant every 4 or 5 cuts or with an elaborate industrial drip system. Wax sticks are not recommended. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.
10" Plastic Saw Blade
80 MTCG tooth, -3° hook, 0.110" kerf, 5/8" arbor. For cutting plexiglass and plastics. This industrial blades cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting.
10" Coated Solid Surface Blade
72 MTCG tooth, 0° hook, 0.126" kerf, 5/8" arbor. Specially designed triple chip grind (TCG) tooth design with a special side grind for leaving swirl-free cuts in solid surface materials such as DuPont Corian®, Wilsonart Gibraltar®, and SSV Fountainhead®. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
10" HardiPlank / Fiber Cement Saw Blade
6 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).
See all Hardiplank Blades