Table Saw Specialty Blades

Freud LU90M010 Saw Blade

10" Thin Stock Nonferrous Metal Saw Blade

by Freud Saw Blades

PART#: LU90M010
COST: $94.99

100 TCG tooth, 5° hook, 0.110" kerf, 5/8" arbor. For producing smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metals. Designed specifically to cut thin, nonferrous metal extrusions such as aluminum storm window frames without damaging the delicate profiles. The high number of specially formulated MicroGrain carbide tips and the slightly positive hook angle allow these blades to slice quickly and cleanly through the material without binding. Freud recommends ample use of a liquid lubricant when cutting. This can be accomplished with a squirt of WD-40 or other lubricant every 4 or 5 cuts or with an elaborate industrial drip system. Wax sticks are not recommended. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Freud LU94M010 Saw Blade

Free Shipping!

Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.

10" Plastic Saw Blade

by Freud Saw Blades

PART#: LU94M010
COST: $79.99

80 MTCG tooth, -3° hook, 0.110" kerf, 5/8" arbor. For cutting plexiglass and plastics. This industrial blades cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting.

Freud LU95R010 Saw Blade

10" Coated Solid Surface Blade

by Freud Saw Blades

PART#: LU95R010
COST: $86.00

72 MTCG tooth, 0° hook, 0.126" kerf, 5/8" arbor. Specially designed triple chip grind (TCG) tooth design with a special side grind for leaving swirl-free cuts in solid surface materials such as DuPont Corian®, Wilsonart Gibraltar®, and SSV Fountainhead®. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Hitachi 18108 HardiPlank Saw Blade

10" HardiPlank / Fiber Cement Saw Blade

by Hitachi

PART#: 18108
COST: $79.00

6 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).

Hot Tool Deals!!!

Greenlee 9952-11 Utility Knife Blades

Greenlee Utility Knife Blade 100 Pack

PART#: 9952-11
COST: $4.95

Universal size fits most knives. Patented serrated blade design for easier cutting and longer life. Includes 100 blades with Dispenser.

See LARGER IMAGE

Bosch Knife

Bosch Retractable Knife

PART#: H290B
COST: $9.95

Includes pouch.

See LARGER IMAGE

DeWalt DWPVTDRV3 Nut Driver Set

DeWalt DWPVTDRV3 Nut Driver Set

PART#: DWPVTDRV3
COST: $6.95

DeWalt DWPVTDRV3 magnetic pivoting nut driver set for use with 1/4" hex shank compatible impact tools. Ideal for home repair, automotive and industrial applications.

See LARGER IMAGE , MORE INFO

Bucket Boss 40901 Combo Pack

Bucket Boss Combo Pack

PART#: 40901
COST: $9.95

Includes deluxe grade bucket tool orgnizer and Gatemouth tote bag.

See LARGER IMAGE , MORE INFO

Jorgensen 9270 Tape Measure

Jorgensen 25' Tape Measure

PART#: 9270
COST: $3.95

1/8" numerical readout. Sliding lock. Sliding end hook for true zero measurements. Nail slot for drawing circles. Groove for measuring on string or wire. 3-rivet tip for durability. Cushioned blade return.

See LARGER IMAGE

100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.

See LARGER IMAGE , MORE INFO

Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools