Table Saw Crosscut Blades
60 Tooth Smooth Crosscutting Saw Blade
by DeWalt
COST: $49.00
60 ATB teeth, 5/8" arbor, 10 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
10" Diablo Fine Finish Saw Blade
by Freud Blades
COST: $39.90
60 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, plywood and moulding.
10" Diablo Ultra Finish Saw Blade
by Freud Blades
COST: $49.97
80 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. This Diablo ultra finish saw blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction. This blade leaves a smooth, velvety finish that requires little to no sanding. Ideal for cross-cutting oak, pine, melamine, veneer plywood and delicate moulding.
10" Coated Precision Crosscut Saw Blade
by Freud Blades
COST: $89.99
80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor. Use for crisp, splinter-free and chip-free cuts in hard and soft woods. Flawless finish in veneered plywood, melamines & laminates. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
80 Tooth Fine Crosscutting Saw Blade
by DeWalt
COST: $52.50
80 ATB teeth, 5/8" arbor, 10 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
10" Coated Ultimate Cut-0ff Saw Blade
by Freud Blades
COST: $84.99
80 ATB tooth, 10° hook, 0.116" kerf, 5/8" arbor. Glass-smooth finishes when crosscutting hard and soft woods with little or no sanding required. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
10" Coated Ultimate Thin Kerf Saw Blade
by Freud Blades
COST: $64.99
80 ATB tooth, 5° hook, 0.098" kerf, 5/8" arbor. Ultimate crosscutting blades for glass-smooth finishes with underpowered saws. Great choice for fine craftsmen, picture framers and trim carpenters. Thin kerf blade requires less horse power to produce good results. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
Free Shipping!
Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.
10" Coated Thin Kerf Crosscut Blade
by Freud Blades
COST: $54.99
60 ATB tooth, 15° hook, 0.090" kerf, 5/8" arbor. Provides a fine finish crosscut in hardwoods, softwoods and mouldings with underpowered saws. Thin kerf blade requires less horse power to produce good results. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
10" Cabinetmaker's Crosscut Saw Blade
by Freud Blades
COST: $64.99
60 ATB tooth, 10° hook, 0.126" kerf, 5/8" arbor. Heavy-duty crosscutting blade designed for the industrial cabinetmaker. Provides a good crosscut and long cutting life in hardwood, softwood, plywood and chipboard. Ideal for cutting 1/2" to 2-3/4" thicknesses most commonly used by cabinemakers.
