Table Saw Combination Blades
Combination Saw Blade
by DeWalt
COST: $39.00
50 ATB/R teeth, 5/8" arbor, 15 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
10" Diablo Combination Saw Blade
by Freud Blades
COST: $36.99
50 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The best choice for a table saw when one blade is needed for ripping and crosscutting.
Free Shipping!
Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.
10" Coated Thin Kerf Combination Blade
by Freud Blades
COST: $54.99
50 combination (ATB & Flat Top) tooth, 10° hook, 0.091" kerf, 5/8" arbor. Great for underpowered saws that need full kerf stability. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
10" Coated Combination Blade
by Freud Blades
COST: $69.49
50 combination (ATB & Flat Top) tooth, 10° hook, 0.126" kerf, 5/8" arbor. Heavy-duty general purpose blade. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.
10" Multi-Purpose Crosscut / Rip Saw Blade
by Freud Blades
COST: $59.00
60 TCG tooth, 10° hook, 0.126" kerf, 5/8" arbor. The triple chip grind makes this blade suitable for cutting stacks of man-made wood products up to 2-3/4" thick. Will also give good results crosscutting and ripping hard and soft woods.
10" Premium Combination Blade
COST: $79.00
60 tooth, carbide-tipped, 3/32" kerf, 5/8" arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping. Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering.
10" Trim & Cross-Cut All Purpose Woodworker I Saw Blade
COST: $105.00
60 tooth, carbide-tipped, 30° ATB, 5° hook, 3/32" kerf, 5/8" arbor. Scratch-free, polished crosscut and rip cuts on wood. Special side clearances produce super smooth cuts with or across the grain. Good for trim work, plywood veneers, and melamine. Self-feeding tendency is reduced by thin kerf and 5° face hook.
