|
 |
WHAT'S ON THIS PAGE?
|
|
Crosscut Table Saw Blades |
 |
 |
|
 |
|
%%SoftCart.product(FREUD1060X).Stock%%
PART#: D1060X
COST: $%%product(FREUD1060X).Price%% |
|
60 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding.
Ideal for crosscutting oak, pine, melamine, plywood and moulding. | |
 |
|
|
|
|
%%SoftCart.product(FREUD1080X).Stock%%
PART#: D1080X
COST: $%%product(FREUD1080X).Price%% |
|
80 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
This Diablo ultra finish saw blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction.
This blade leaves a smooth, velvety finish that requires little to no sanding.
Ideal for cross-cutting oak, pine, melamine, veneer plywood and delicate moulding. | |
 |
|
|
|
|
%%SoftCart.product(FREULU73M010).Stock%%
PART#: LU73M010
COST: $%%product(FREULU73M010).Price%% |
|
60 ATB tooth, 10° hook, 0.126" kerf, 5/8" arbor.
Heavy-duty crosscutting blade designed for the industrial cabinetmaker.
Provides a good crosscut and long cutting life in hardwood, softwood, plywood and chipboard.
Ideal for cutting 1/2" to 2-3/4" thicknesses most commonly used by cabinemakers. | |
|
Ripping Table Saw Blades |
|
 |
|
|
|
|
%%SoftCart.product(FREUD1024X).Stock%%
PART#: D1024X
COST: $%%product(FREUD1024X).Price%% |
|
24 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The top choice for contractors who want a smooth finish when ripping. Ideal for ripping oak, pine, pressure treated lumber and plywood. | |
 |
|
|
|
|
%%SoftCart.product(FREULM72M010).Stock%%
PART#: LM72M010
COST: $%%product(FREULM72M010).Price%% |
|
24 flat tooth, 20° hook, 0.126" kerf, 5/8" arbor.
For heavy duty smooth, fast ripping in hardwoods and softwoods.
The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a glue line precision cut from 3/4" to 2-3/4" thick. | |
 |
10" Fast Feed Rip Customized Woodworker II Saw Blade
by Forrest Blades |
|
|
|
%%SoftCart.product(FORRWW10206125).Stock%%
PART#: WW-10-20-6-125
COST: $%%product(FORRWW10206125).Price%% |
|
20 tooth, carbide-tipped, 1/8" kerf, 5/8" arbor. Fast feed rip for thick hardwood without burning. Ideal for joinery and special uses. | |
|
General Purpose Table Saw Blades |
|
 |
|
|
|
|
%%SoftCart.product(FREUD1040A).Stock%%
PART#: D1040X
COST: $%%product(FREUD1040A).Price%% |
|
40 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
The best choice for your miter saw, this blade leaves a smooth cut in a variety of applications. Ideal for cutting oak, pine, plywood, pressure treated lumber and beams. | |
 |
|
|
|
|
%%SoftCart.product(FREULU72M010).Stock%%
PART#: LU72M010
COST: $%%product(FREULU72M010).Price%% |
|
40 ATB tooth, 13° hook, 0.126" kerf, 5/8" arbor.
The best choice for heavy-duty production sizing of hard or soft wood.
Ideal ripping is from 3/8" to 1" thick and crosscutting from 1-3/8" to 3-1/2" thick. | |
 |
|
|
|
%%SoftCart.product(FORRWW10407125).Stock%%
PART#: WW-10-40-7-125
COST: $%%product(FORRWW10407125).Price%% |
|
40 tooth, carbide-tipped, 15° ATB, 20° hook, 1/8" kerf, 5/8" arbor. Rips, crosscuts and miters on all hard and soft woods.
Slices oak or birch veneer without splintering at moderate feed. Planer side clearances yield smooth as sanded cuts.
Side wobble is held to 0.001". | |
|
Combination Table Saw Blades |
|
 |
|
|
|
|
%%SoftCart.product(FREUD1050X).Stock%%
PART#: D1050X
COST: $%%product(FREUD1050X).Price%% |
|
50 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
The best choice for a table saw when one blade is needed for ripping and crosscutting. | |
 |
|
|
|
|
%%SoftCart.product(MATSMS10060CB).Stock%%
PART#: MS10060CB
COST: $%%product(MATSMS10060CB).Price%% |
|
60 tooth, carbide-tipped, 3/32" kerf, 5/8" arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping.
Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering. | |
 |
 |
10" Trim & Cross-Cut All Purpose Woodworker I Saw Blade
by Forrest Blades |
|
|
|
%%SoftCart.product(FORRWW10607100).Stock%%
PART#: WW-10-60-7-100
COST: $%%product(FORRWW10607100).Price%% |
|
60 tooth, carbide-tipped, 30° ATB, 5° hook, 3/32" kerf, 5/8" arbor.
Scratch-free, polished crosscut and rip cuts on wood. Special side clearances produce super smooth cuts with or across the grain.
Good for trim work, plywood veneers, and melamine. Self-feeding tendency is reduced by thin kerf and 5° face hook. | |
|
Laminate Table Saw Blades |
|
 |
|
10" Coated Precision Crosscut / Laminate Saw Blade
by Freud Blades |
|
|
|
%%SoftCart.product(FREULU80R010).Stock%%
PART#: LU80R010
COST: $%%product(FREULU80R010).Price%% |
|
80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor.
Use for crisp, splinter-free and chip-free cuts in hard and soft woods.
Flawless finish in veneered plywood, melamines & laminates.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
 |
|
10" Coated Single Sided Laminate / Wood Saw Blade
by Freud Blades |
|
|
|
%%SoftCart.product(FREULU98R010).Stock%%
PART#: LU98R010
COST: $%%product(FREULU98R010).Price%% |
|
80 TCG tooth, 5° hook, 0.126" kerf, 5/8" arbor.
Long life, production blades for single-sided laminates, chip board and other manmade materials.
Thses are the blades of choice for countertop fabricators and laminate flooring installers.
Triple Chip Grind (TCG) tooth design will give excellent cuts in hard and soft wood and wood products.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
 |
|
|
|
%%SoftCart.product(FORRDH10807125).Stock%%
PART#: DH-10-80-7-125
COST: $%%product(FORRDH10807125).Price%% |
|
80 tooth, carbide-tipped, 40° high angle ATB, 5° hook, 1/8" kerf, 5/8" arbor. A great blade for cutting birch and oak ply veneers and low pressure lamnates such as melamine and vinyl over particle board.
No need for a scoring set up as this blade cuts clean with no splintering or chip-out on top and bottom surfaces.
Also recommended for fine cross-cutting on all woods. | |
|
Specialty Table Saw Blades |
|
 |
|
|
|
|
%%SoftCart.product(FREULU94M010).Stock%%
PART#: LU94M010
COST: $%%product(FREULU94M010).Price%% |
|
80 MTCG tooth, -3° hook, 0.110" kerf, 5/8" arbor.
For cutting plexiglass and plastics.
This industrial blades cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. | |
 |
|
|
|
|
%%SoftCart.product(FREULU95R010).Stock%%
PART#: LU95R010
COST: $%%product(FREULU95R010).Price%% |
|
72 MTCG tooth, 0° hook, 0.126" kerf, 5/8" arbor.
Specially designed triple chip grind (TCG) tooth design with a special side grind for leaving swirl-free cuts in solid surface materials such as DuPont Corian®, Wilsonart Gibraltar®, and SSV Fountainhead®.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
10" HardiPlank / Fiber Cement Saw Blade
by Hitachi |
|
|
|
%%SoftCart.product(HITA18108).Stock%%
PART#: 18108
COST: $%%product(HITA18108).Price%% |
|
6 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting.
Designed for use with James Hardie siding products (Hardi Plank & Hardi Board). |
|
|
