Miter Saw Blades

8-1/2" Ultra Cross-Cut Blade

by Matsushita

60 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor. For use on all woods for cutting cross grain. Not recommended beyond minimal ripping. This blade can be used for ripping but material must be fed slower to avoid overloading. The cross-cut style is excellent for miter box saws.

8-1/2" 60 Tooth Diablo Saw Blade

by Freud Saw Blades

60 tooth ATB, 7° hook, 0.087" kerf, 5/8" arbor. Designed for sliding miter saws. The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, plywood and moulding.

10" Diablo Saw Blade

by Freud Saw Blades

24 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The top choice for contractors who want a smooth finish when ripping. Ideal for ripping oak, pine, pressure treated lumber and plywood.

60 ATB tooth, 15° hook, 0.090" kerf, 5/8" arbor. Provides a fine finish crosscut in hardwoods, softwoods and mouldings with underpowered saws. Thin kerf blade requires less horse power to produce good results. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

10" Cabinetmaker's Crosscut Saw Blade

by Freud Saw Blades

60 ATB tooth, 10° hook, 0.126" kerf, 5/8" arbor. Heavy-duty crosscutting blade designed for the industrial cabinetmaker. Provides a good crosscut and long cutting life in hardwood, softwood, plywood and chipboard. Ideal for cutting 1/2" to 2-3/4" thicknesses most commonly used by cabinemakers.

12" Coated Ultimate Cut-0ff Saw Blade

by Freud Saw Blades

96 ATB tooth, 10° hook, 0.116" kerf, 1" arbor. Glass-smooth finishes when crosscutting hard and soft woods with little or no sanding required. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

12" Coated Thin Kerf Crosscut Blade

by Freud Saw Blades

80 ATB tooth, 15° hook, 0.094" kerf, 1" arbor. Provides a fine finish crosscut in hardwoods, softwoods and mouldings with underpowered saws. Thin kerf blade requires less horse power to produce good results. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

12" Chop Master Saw Blade

by Forrest Saw Blades

80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 0.115" kerf, 1" arbor. For miter-chop saws, sliding compound and radial arm saws. Heavy than normal steel plate maintains maximum stability for the best cut. The 30° ATB with raker tooth design produces tight, perfectly cut miter joints with no bottom splintering. Feeds easy with smooth sawn edges on all types of wood.

15" Wood / Aluminum Miter Saw Blade

by Hitachi

110 triple chip tooth design, carbide-tipped, 1" arbor. General-purpose blade for use with the Hitachi C15FB 15" Miter Saw in wood and aluminum.

10" Coated Precision Crosscut / Laminate Saw Blade

by Freud Saw Blades

80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor. Use for crisp, splinter-free and chip-free cuts in hard and soft woods. Flawless finish in veneered plywood, melamines & laminates. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

10" Coated Double Sided Laminate / Melamine Saw Blade

by Freud Saw Blades

80 TCG tooth, -3° hook, 0.126" kerf, 5/8" arbor. Ultra long life and excellent finish on the top and bottom of laminates, melamines, and veneered plywood. Triple Chip Grind (TCG) tooth design with a negative hook angle provides superior life when cutting abrasive man-made materials. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

8-1/2" Non-Ferrous Miter Saw Blade

by Hitachi

60 TCG tooth, 8° hook, 0.095" kerf, 5/8" arbor. Cross cutting and miter of brass, aluminum, copper and other non-ferrous metals with a miter saw. Lubricants are recommended when used for this application. Good for woodworking and cutting plastics. Tungsten carbide triple-chip grind produces clean cuts.

10" Thin Stock Nonferrous Metal Saw Blade

by Freud Saw Blades

100 TCG tooth, 5° hook, 0.110" kerf, 5/8" arbor. For producing smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metals. Designed specifically to cut thin, nonferrous metal extrusions such as aluminum storm window frames without damaging the delicate profiles. The high number of specially formulated MicroGrain carbide tips and the slightly positive hook angle allow these blades to slice quickly and cleanly through the material without binding. Freud recommends ample use of a liquid lubricant when cutting. This can be accomplished with a squirt of WD-40 or other lubricant every 4 or 5 cuts or with an elaborate industrial drip system. Wax sticks are not recommended. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

15" Wood / Aluminum Miter Saw Blade

by Hitachi

110 TCG tooth, 0 degree hook, 0.118 kerf, 1" arbor. Cross cutting and miter of brass, aluminum, copper and other non-ferrous metals with a miter saw. Lubricants are recommended when used for this application. Good for woodworking and cutting plastics. Tungsten carbide triple-chip grind produces clean cuts. For use with the Hitachi C15FB 15" Miter Saw.

10" HardiPlank / Fiber Cement Saw Blade

by Hitachi

6 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).

12" HardiPlank HardiPlank / Fiber Cement Saw Blade

by Hitachi

8 tooth, diamond-tipped, 1" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).