|
 |
WHAT'S ON THIS PAGE?
|
|
Wood Miter Saw Blades |
 |
 |
|
8-1/2" Ultra Fine Finish Miter Saw Blade
by Hitachi |
 |
|
PART#: 998862
COST: $27.50 |
|
60 ATB tooth, 6° hook, 0.087" kerf, 5/8" arbor.
Ultra Fine smooth finish in decorative moldings, veneer laminates, soft and hardwood cabinetry. | |
 |
|
|
|
|
PART#: MS81260CC
COST: $69.00 |
|
60 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor. For use on all woods for cutting cross grain. Not recommended beyond minimal ripping.
This blade can be used for ripping but material must be fed slower to avoid overloading.
The cross-cut style is excellent for miter box saws. | |
 |
|
|
|
|
PART#: D0860S
COST: $41.97 |
|
60 tooth ATB, 7° hook, 0.087" kerf, 5/8" arbor.
Designed for sliding miter saws. The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding.
Ideal for crosscutting oak, pine, melamine, plywood and moulding. | |
 |
|
8-1/2" Coated Thin Kerf Sliding Compound Miter Saw Blade
by Freud Blades |
|
|
|
PART#: LU91R008
COST: $57.99 |
|
48 ATB tooth, -5° hook, 0.090" kerf, 5/8" arbor.
Provides a fine finish cut for sliding miter saws and radial arm saws.
Thin kerf blade requires less horse power to produce good results.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
8-1/2" Thin Kerf Sliding Compound Miter Saw Blade
by Freud Blades |
|
|
|
PART#: LU91M008
COST: $39.00< |
|
48 ATB tooth, -5° hook, 0.090" kerf, 5/8" arbor.
Provides a fine finish cut for sliding miter saws and radial arm saws.
Thin kerf blade requires less horse power to produce good results. | |
|
Metal Miter Saw Blades |
|
 |
|
8-1/2" Non-Ferrous Miter Saw Blade
by Hitachi |
|
|
|
PART#: 998864
COST: $32.50 |
|
60 TCG tooth, 8° hook, 0.095" kerf, 5/8" arbor.
Cross cutting and miter of brass, aluminum, copper and other non-ferrous metals with a miter saw.
Lubricants are recommended when used for this application. Good for woodworking and cutting plastics.
Tungsten carbide triple-chip grind produces clean cuts. | |
|
