|
 |
WHAT'S ON THIS PAGE?
|
|
Wood Miter Saw Blades |
 |
 |
|
 |
|
PART#: D1244X
COST: $34.97 |
|
44 tooth ATB, 15° hook, 0.098" kerf, 1" arbor.
The best choice for your miter saw, this blade leaves a smooth cut in a variety of applications.
Ideal for cutting oak, pine, plywood, pressure treated lumber and beams. | |
 |
|
|
|
|
PART#: LU86R012
COST: $49.99 |
|
48 ATB tooth, 13° hook, 0.094" kerf, 1" arbor.
For production sizing of hard or soft wood with underpowered saws.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
|
|
PART#: WW-12-60-7-125G
COST: $115.00 |
|
60 tooth, carbide-tipped, 20° ATB, 5° hook, 1/8" kerf, 1" arbor.
Scratch-free, polished crosscut and rip cuts on wood. Special side clearances produce super smooth cuts with or across the grain.
Good for trim work, plywood veneers, and melamine. Self-feeding tendency is reduced by thin kerf and 5° face hook. | |
 |
|
|
|
|
PART#: LU91M012
COST: $69.99 |
|
72 ATB tooth, -5° hook, 0.090" kerf, 1" arbor.
Provides a fine finish cut for sliding miter saws and radial arm saws.
Thin kerf blade requires less horse power to produce good results. | |
 |
|
80 Tooth Fine Crosscutting Saw Blade
by DeWalt |
|
|
|
PART#: DW3232PT
COST: $59.00 |
|
80 ATB teeth, 1" arbor, -5 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
| |
 |
|
|
|
|
PART#: D1280X
COST: $54.97 |
|
80 tooth ATB, 7° hook, 0.118" kerf, 1" arbor.
Designed for radial arm saws.
The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, plywood and moulding. | |
 |
|
|
|
|
PART#: LU88R012
COST: $69.99 |
|
80 ATB tooth, 15° hook, 0.094" kerf, 1" arbor.
Provides a fine finish crosscut in hardwoods, softwoods and mouldings with underpowered saws.
Thin kerf blade requires less horse power to produce good results.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
|
|
PART#: CM-12-80-6-115
COST: $119.00 |
|
80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 0.115" kerf, 1" arbor.
For miter-chop saws, sliding compound and radial arm saws.
Heavy than normal steel plate maintains maximum stability for the best cut. The 30° ATB with raker tooth design produces tight, perfectly cut miter joints with no bottom splintering.
Feeds easy with smooth sawn edges on all types of wood. | |
 |
|
96 Tooth Ultra-Smooth Crosscutting Saw Blade
by DeWalt |
|
|
|
PART#: DW7296PT
COST: $69.00 |
|
96 H-ATB teeth, 1" arbor, -5 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
| |
 |
|
|
|
|
PART#: LU85R012
COST: $124.99 |
|
96 ATB tooth, 10° hook, 0.116" kerf, 1" arbor.
Glass-smooth finishes when crosscutting hard and soft woods with little or no sanding required.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
Metal Miter Saw Blades |
|
 |
|
|
|
|
PART#: D1296N
COST: $64.97 |
|
96 tooth TCG, -5° hook, 0.091" kerf, 1" arbor.
Use this Diablo saw blade for on-the-job cutting of non-ferrous metal such as copper pipe, aluminum extrusions, brass plate and plastics. | |
|
Hardi Miter Saw Blades |
|
 |
|
12" HardiPlank HardiPlank / Fiber Cement Saw Blade
by Hitachi |
|
|
|
PART#: 18109
COST: $89.00 |
|
8 tooth, diamond-tipped, 1" arbor.
Fiber cement siding and board ripping and crosscutting.
Designed for use with James Hardie siding products (Hardi Plank & Hardi Board). | |
|
