Festool New Tools

10" Miter Saw Blades

Wood Miter Saw Blades

DeWalt DW7124 Saw Blade

24 Tooth Fast Ripping Saw Blade

by DeWalt

PART#: DW7124PT
COST: $29.00

24 FTG teeth, 5/8" arbor, 20 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.

Freud Diablo Series D1040X Saw Blade

10" Diablo General Purpose Saw Blade

by Freud Saw Blades

PART#: D1040X
COST: $29.97

40 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The best choice for your miter saw, this blade leaves a smooth cut in a variety of applications. Ideal for cutting oak, pine, plywood, pressure treated lumber and beams.

Freud LU72M010 Saw Blade

10" General Purpose Thick Stock Saw Blade

by Freud Saw Blades

PART#: LU72M010
COST: $55.49

40 ATB tooth, 13° hook, 0.126" kerf, 5/8" arbor. The best choice for heavy-duty production sizing of hard or soft wood. Ideal ripping is from 3/8" to 1" thick and crosscutting from 1-3/8" to 3-1/2" thick.

DeWalt DW7140 Saw Blade

40 Tooth Ripping / Crosscutting Saw Blade

by DeWalt

PART#: DW7140PT
COST: $39.00

40 ATB teeth, 5/8" arbor, 20 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.

DeWalt DW7150 Saw Blade

Combination Saw Blade

by DeWalt

PART#: DW7150PT
COST: $39.00

50 ATB/R teeth, 5/8" arbor, 15 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.

Freud LU83R010 Saw Blade

Free Shipping!

Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.

10" Coated Thin Kerf Combination Blade

by Freud Saw Blades

PART#: LU83R010
COST: $54.99

50 combination (ATB & Flat Top) tooth, 10° hook, 0.091" kerf, 5/8" arbor. Great for underpowered saws that need full kerf stability. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Freud LU84R011 Saw Blade

10" Coated Combination Blade

by Freud Saw Blades

PART#: LU84R011
COST: $69.49

50 combination (ATB & Flat Top) tooth, 10° hook, 0.126" kerf, 5/8" arbor. Heavy-duty general purpose blade. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

DeWalt DW3215 Saw Blade

60 Tooth Smooth Crosscutting Saw Blade

by DeWalt

PART#: DW3215PT
COST: $49.00

60 ATB teeth, 5/8" arbor, 10 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.

Freud Diablo Series D1060X Saw Blade

10" Diablo Fine Finish Saw Blade

by Freud Saw Blades

PART#: D1060X
COST: $39.90

60 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, plywood and moulding.

Freud LU88R010 Saw Blade

Free Shipping!

Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.

10" Coated Thin Kerf Crosscut Blade

by Freud Saw Blades

PART#: LU88R010
COST: $54.99

60 ATB tooth, 15° hook, 0.090" kerf, 5/8" arbor. Provides a fine finish crosscut in hardwoods, softwoods and mouldings with underpowered saws. Thin kerf blade requires less horse power to produce good results. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Freud LU73M010 Saw Blade

10" Cabinetmaker's Crosscut Saw Blade

by Freud Saw Blades

PART#: LU73M010
COST: $64.99

60 ATB tooth, 10° hook, 0.126" kerf, 5/8" arbor. Heavy-duty crosscutting blade designed for the industrial cabinetmaker. Provides a good crosscut and long cutting life in hardwood, softwood, plywood and chipboard. Ideal for cutting 1/2" to 2-3/4" thicknesses most commonly used by cabinemakers.

Matsushita MS10060CB Saw Blade

10" Premium Combination Blade

by Matsushita Blades

PART#: MS10060CB
COST: $89.00

60 tooth, carbide-tipped, 3/32" kerf, 5/8" arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping. Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering.

Freud Diablo Series D1080X Saw Blade

10" Diablo Ultra Finish Saw Blade

by Freud Saw Blades

PART#: D1080X
COST: $49.97

80 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor. This Diablo ultra finish saw blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction. This blade leaves a smooth, velvety finish that requires little to no sanding. Ideal for cross-cutting oak, pine, melamine, veneer plywood and delicate moulding.

Freud LU80R010 Saw Blade

10" Coated Precision Crosscut Saw Blade

by Freud Saw Blades

PART#: LU80R010
COST: $89.99

80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor. Use for crisp, splinter-free and chip-free cuts in hard and soft woods. Flawless finish in veneered plywood, melamines & laminates. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Freud LU85R010 Saw Blade

10" Coated Ultimate Cut-0ff Saw Blade

by Freud Saw Blades

PART#: LU85R010
COST: $84.99

80 ATB tooth, 10° hook, 0.116" kerf, 5/8" arbor. Glass-smooth finishes when crosscutting hard and soft woods with little or no sanding required. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Freud LU74R010 Saw Blade

10" Coated Ultimate Thin Kerf Saw Blade

by Freud Saw Blades

PART#: LU74R010
COST: $71.49

80 ATB tooth, 5° hook, 0.098" kerf, 5/8" arbor. Ultimate crosscutting blades for glass-smooth finishes with underpowered saws. Great choice for fine craftsmen, picture framers and trim carpenters. Thin kerf blade requires less horse power to produce good results. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Forrest CM-10-80-6-105 Chop Master Saw Blade

10" Chop Master Saw Blade

by Forrest Saw Blades

PART#: CM-10-80-6-105
COST: $115.00

80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 7/64" kerf, 5/8" arbor. For miter-chop saws, sliding compound and radial arm saws. Heavier than normal steel plate maintains maximum stability for the best cut. the 30° ATB with raker tooth design produces tight, perfectly cut miter joints with no bottom splintering. feeds easy with smooth sawn edges on all types of wood.

DeWalt DW3218 Saw Blade

80 Tooth Fine Crosscutting Saw Blade

by DeWalt

PART#: DW3218PT
COST: $52.50

80 ATB teeth, 5/8" arbor, 10 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.

Laminate Miter Saw Blades

Freud LU80R010 Saw Blade

10" Coated Precision Crosscut / Laminate Saw Blade

by Freud Saw Blades

PART#: LU80R010
COST: $89.99

80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor. Use for crisp, splinter-free and chip-free cuts in hard and soft woods. Flawless finish in veneered plywood, melamines & laminates. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Freud LU98R010 Saw Blade

10" Coated Single Sided Laminate / Wood Saw Blade

by Freud Saw Blades

PART#: LU98R010
COST: $85.00

80 TCG tooth, 5° hook, 0.126" kerf, 5/8" arbor. Long life, production blades for single-sided laminates, chip board and other manmade materials. Thses are the blades of choice for countertop fabricators and laminate flooring installers. Triple Chip Grind (TCG) tooth design will give excellent cuts in hard and soft wood and wood products. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

Freud LU96R010 Saw Blade

10" Coated Thin Kerf Double Sided Laminate / Melamine Saw Blade

by Freud Saw Blades

PART#: LU96R010
COST: $69.99

80 TCG tooth, -3° hook, 0.091" kerf, 5/8" arbor. Ultra long life and excellent finish on the top and bottom of laminates, melamines, and veneered plywood. The thin kerf design is great for underpowered saws that need full kerf stability. Triple Chip Grind (TCG) tooth design with a negative hook angle provides superior life when cutting abrasive man-made materials. Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust.

HardiPlank Miter Saw Blades

Hitachi 18108 HardiPlank Saw Blade

10" HardiPlank / Fiber Cement Saw Blade

by Hitachi

PART#: 18108
COST: $79.00

6 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).

Hot Tool Deals!!!

Skil SPT67WM-22 Skilsaw

Skil SPT67WM-22 7-1/4" Sidewinder Skilsaw Special

PART#: SPT67WM-22
Add to Cart to See Price

See LARGER IMAGE

Diablo Demo Demon Reciprocating Saw Blade Special

9" Diablo Demo Demon Reciprocating Saw Blade 2 Pack Special

Two for the Price of One!

PART#: DS0906CWP
COST: $9.95

The Diablo Demo Demon Reciprocating Blades are specifically designed for maximum performance in nail-embedded wood. This 6 TPI high performance carbide tipped blade delivers 10X longer cutting life.

See LARGER IMAGE

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $19.95

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.

See LARGER IMAGE , MORE INFO

100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.

See LARGER IMAGE , MORE INFO

SHOPPING INFORMATION

SUBTOTAL: $71.49

SHIPPING CALCULATOR
Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

PRODUCT NUMBER PRODUCT QUANTITY UNIT PRICE TOTAL
FREULU74R010 10" 80T ATB BLADE 1 $71.49 $71.49
Subtotal $71.49
Coastal Tool - Discount Power Tools & Hand Tools nsession