|
 |
WHAT'S ON THIS PAGE?
|
|
Wood Miter Saw Blades |
 |
 |
|
24 Tooth Fast Ripping Saw Blade
by DeWalt |
 |
|
%%SoftCart.product(BLACDW7124PT).Stock%%
PART#: DW7124PT
COST: $%%product(BLACDW7124PT).Price%% |
|
24 FTG teeth, 5/8" arbor, 20 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
| |
 |
|
|
|
|
%%SoftCart.product(FREUD1040A).Stock%%
PART#: D1040X
COST: $%%product(FREUD1040A).Price%% |
|
40 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
The best choice for your miter saw, this blade leaves a smooth cut in a variety of applications. Ideal for cutting oak, pine, plywood, pressure treated lumber and beams. | |
 |
|
|
|
|
%%SoftCart.product(FREULU72M010).Stock%%
PART#: LU72M010
COST: $%%product(FREULU72M010).Price%% |
|
40 ATB tooth, 13° hook, 0.126" kerf, 5/8" arbor.
The best choice for heavy-duty production sizing of hard or soft wood.
Ideal ripping is from 3/8" to 1" thick and crosscutting from 1-3/8" to 3-1/2" thick. | |
 |
|
|
|
|
%%SoftCart.product(FREULU86R010).Stock%%
PART#: LU86R010
COST: $%%product(FREULU86R010).Price%% |
|
40 ATB tooth, 13° hook, 0.094" kerf, 5/8" arbor.
For production sizing of hard or soft wood with underpowered saws.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
40 Tooth Ripping / Crosscutting Saw Blade
by DeWalt |
|
|
|
%%SoftCart.product(BLACDW7140PT).Stock%%
PART#: DW7140PT
COST: $%%product(BLACDW7140PT).Price%% |
|
40 ATB teeth, 5/8" arbor, 20 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
| |
 |
|
Combination Saw Blade
by DeWalt |
|
|
|
%%SoftCart.product(BLACDW7150PT).Stock%%
PART#: DW7150PT
COST: $%%product(BLACDW7150PT).Price%% |
|
50 ATB/R teeth, 5/8" arbor, 15 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
| |
 |
|
|
|
|
%%SoftCart.product(FREULU83R010).Stock%%
PART#: LU83R010
COST: $%%product(FREULU83R010).Price%% |
|
50 combination (ATB & Flat Top) tooth, 10° hook, 0.091" kerf, 5/8" arbor.
Great for underpowered saws that need full kerf stability.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
|
|
|
%%SoftCart.product(FREULU84R011).Stock%%
PART#: LU84R011
COST: $%%product(FREULU84R011).Price%% |
|
50 combination (ATB & Flat Top) tooth, 10° hook, 0.126" kerf, 5/8" arbor.
Heavy-duty general purpose blade.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
60 Tooth Smooth Crosscutting Saw Blade
by DeWalt |
|
|
|
%%SoftCart.product(BLACDW3215PT).Stock%%
PART#: DW3215PT
COST: $%%product(BLACDW3215PT).Price%% |
|
60 ATB teeth, 5/8" arbor, 10 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
| |
 |
|
|
|
|
%%SoftCart.product(FREUD1060X).Stock%%
PART#: D1060X
COST: $%%product(FREUD1060X).Price%% |
|
60 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
The ideal choice for trim carpenters, Diablo fine finish saw blades leave a smooth surface that requires little to no sanding.
Ideal for crosscutting oak, pine, melamine, plywood and moulding. | |
 |
|
|
|
|
%%SoftCart.product(FREULU88R010).Stock%%
PART#: LU88R010
COST: $%%product(FREULU88R010).Price%% |
|
60 ATB tooth, 15° hook, 0.090" kerf, 5/8" arbor.
Provides a fine finish crosscut in hardwoods, softwoods and mouldings with underpowered saws.
Thin kerf blade requires less horse power to produce good results.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
|
|
|
%%SoftCart.product(FREULU73M010).Stock%%
PART#: LU73M010
COST: $%%product(FREULU73M010).Price%% |
|
60 ATB tooth, 10° hook, 0.126" kerf, 5/8" arbor.
Heavy-duty crosscutting blade designed for the industrial cabinetmaker.
Provides a good crosscut and long cutting life in hardwood, softwood, plywood and chipboard.
Ideal for cutting 1/2" to 2-3/4" thicknesses most commonly used by cabinemakers. | |
 |
|
|
|
|
%%SoftCart.product(FREULU82M010).Stock%%
PART#: LU82M010
COST: $%%product(FREULU82M010).Price%% |
|
60 TCG tooth, 10° hook, 0.126" kerf, 5/8" arbor.
The triple chip grind makes this blade suitable for cutting stacks of man-made wood products up to 2-3/4" thick.
Will also give good results crosscutting and ripping hard and soft woods. | |
 |
|
|
|
|
%%SoftCart.product(MATSMS10060CB).Stock%%
PART#: MS10060CB
COST: $%%product(MATSMS10060CB).Price%% |
|
60 tooth, carbide-tipped, 3/32" kerf, 5/8" arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping.
Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering. | |
 |
|
|
|
|
%%SoftCart.product(FREUD1080X).Stock%%
PART#: D1080X
COST: $%%product(FREUD1080X).Price%% |
|
80 tooth ATB, 15° hook, 0.098" kerf, 5/8" arbor.
This Diablo ultra finish saw blade offers the quality that fine cabinetmakers expect from Freud, yet this blade is designed for the rough world of professional construction.
This blade leaves a smooth, velvety finish that requires little to no sanding.
Ideal for cross-cutting oak, pine, melamine, veneer plywood and delicate moulding. | |
 |
|
|
|
|
%%SoftCart.product(FREULU80R010).Stock%%
PART#: LU80R010
COST: $%%product(FREULU80R010).Price%% |
|
80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor.
Use for crisp, splinter-free and chip-free cuts in hard and soft woods.
Flawless finish in veneered plywood, melamines & laminates.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
|
|
|
%%SoftCart.product(FREULU85R010).Stock%%
PART#: LU85R010
COST: $%%product(FREULU85R010).Price%% |
|
80 ATB tooth, 10° hook, 0.116" kerf, 5/8" arbor.
Glass-smooth finishes when crosscutting hard and soft woods with little or no sanding required.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
|
|
|
|
%%SoftCart.product(FREULU74R010).Stock%%
PART#: LU74R010
COST: $%%product(FREULU74R010).Price%% |
|
80 ATB tooth, 5° hook, 0.098" kerf, 5/8" arbor.
Ultimate crosscutting blades for glass-smooth finishes with underpowered saws.
Great choice for fine craftsmen, picture framers and trim carpenters. Thin kerf blade requires less horse power to produce good results.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
 |
 |
|
|
|
%%SoftCart.product(FORRCM10806105).Stock%%
PART#: CM-10-80-6-105
COST: $%%product(FORRCM10806105).Price%% |
|
80 tooth, carbide-tipped, 30° ATB with raker tooth, 5° negative hook, 7/64" kerf, 5/8" arbor.
For miter-chop saws, sliding compound and radial arm saws.
Heavier than normal steel plate maintains maximum stability for the best cut. the 30° ATB with raker tooth design produces tight, perfectly cut miter joints with no bottom splintering.
feeds easy with smooth sawn edges on all types of wood. | |
 |
|
80 Tooth Fine Crosscutting Saw Blade
by DeWalt |
|
|
|
%%SoftCart.product(BLACDW3218PT).Stock%%
PART#: DW3218PT
COST: $%%product(BLACDW3218PT).Price%% |
|
80 ATB teeth, 5/8" arbor, 10 degree hook angle. Premium micro-grain carbide produces ultra-sharp cutting edges that dramatically reduce splintering. recision balanced, laser-cut body provides extremely accurate cuts. Tough coat finish reduces heat, friction, and gum to promote blade life.
| |
|
Laminate Miter Saw Blades |
|
|
|
|
|
|
%%SoftCart.product(FREULU80R010).Stock%%
PART#: LU80R010
COST: $%%product(FREULU80R010).Price%% |
|
80 HiATB tooth, 2° hook, 0.126" kerf, 5/8" arbor.
Use for crisp, splinter-free and chip-free cuts in hard and soft woods.
Flawless finish in veneered plywood, melamines & laminates.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
 |
|
|
|
|
%%SoftCart.product(FREULU98R010).Stock%%
PART#: LU98R010
COST: $%%product(FREULU98R010).Price%% |
|
80 TCG tooth, 5° hook, 0.126" kerf, 5/8" arbor.
Long life, production blades for single-sided laminates, chip board and other manmade materials.
Thses are the blades of choice for countertop fabricators and laminate flooring installers.
Triple Chip Grind (TCG) tooth design will give excellent cuts in hard and soft wood and wood products.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
 |
|
|
|
|
%%SoftCart.product(FREULU97R010).Stock%%
PART#: LU97R010
COST: $%%product(FREULU97R010).Price%% |
|
80 TCG tooth, -3° hook, 0.126" kerf, 5/8" arbor.
Ultra long life and excellent finish on the top and bottom of laminates, melamines, and veneered plywood.
Triple Chip Grind (TCG) tooth design with a negative hook angle provides superior life when cutting abrasive man-made materials.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
 |
|
10" Coated Thin Kerf Double Sided Laminate / Melamine Saw Blade
by Freud Saw Blades |
|
|
|
%%SoftCart.product(FREULU96R010).Stock%%
PART#: LU96R010
COST: $%%product(FREULU96R010).Price%% |
|
80 TCG tooth, -3° hook, 0.091" kerf, 5/8" arbor.
Ultra long life and excellent finish on the top and bottom of laminates, melamines, and veneered plywood.
The thin kerf design is great for underpowered saws that need full kerf stability.
Triple Chip Grind (TCG) tooth design with a negative hook angle provides superior life when cutting abrasive man-made materials.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
Metal Miter Saw Blades |
|
 |
|
|
|
|
%%SoftCart.product(FREULU90M010).Stock%%
PART#: LU90M010
COST: $%%product(FREULU90M010).Price%% |
|
100 TCG tooth, 5° hook, 0.110" kerf, 5/8" arbor.
For producing smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metals.
Designed specifically to cut thin, nonferrous metal extrusions such as aluminum storm window frames without damaging the delicate profiles.
The high number of specially formulated MicroGrain carbide tips and the slightly positive hook angle allow these blades to slice quickly and cleanly through the material without binding.
Freud recommends ample use of a liquid lubricant when cutting.
This can be accomplished with a squirt of WD-40 or other lubricant every 4 or 5 cuts or with an elaborate industrial drip system.
Wax sticks are not recommended.
Perma-Shield coating guarantees less working friction and less resin adhesion while preventing the development of rust. | |
|
|
HardiPlank Miter Saw Blades |
|
 |
|
10" HardiPlank / Fiber Cement Saw Blade
by Hitachi |
|
|
|
%%SoftCart.product(HITA18108).Stock%%
PART#: 18108
COST: $%%product(HITA18108).Price%% |
|
6 tooth, diamond-tipped, 5/8" arbor.
Fiber cement siding and board ripping and crosscutting.
Designed for use with James Hardie siding products (Hardi Plank & Hardi Board). | |
|
