|
 |
WHAT'S ON THIS PAGE?
|
|
6" DADO BLADES |
 |
 |
 |
|
%%SoftCart.product(AMAN656030).Stock%%
PART#:
COST: $%%product(AMAN656030).Price%% |
18 ATB & flat tooth, 5/8" arbor hole. Cut grooves from 1/8" to 13/16" wide. Assemblies consists of two outer blades (1/8" thick), and four inside chippers (two 1/8" thick, one 1/16" thick, one 1/4" thick).
Outside blades are hollow-ground for proper clearance and alternate top bevel grind with every sixth tooth flat ground.
Includes:
 Two 18 tooth, carbide-tipped saw blades.
One 1/4" kerf chippers.
Two 1/8" kerf chippers.
One 1/16" kerf chipper.
 Shim Set
Plastic carrying case. | |
 |
 |
|
|
|
|
%%SoftCart.product(FREUSD506).Stock%%
PART#: SD506
COST: $%%product(FREUSD506).Price%% |
20 teeth, 20° top bevel, -12° hook, 5/8" arbor.
Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
Includes:
Two 20 Tooth, Carbide-Tipped Saw Blades
Four 1/8" Kerf, 4 Tooth Chippers
One 3/32" Kerf, 4 Tooth Chipper
One 1/16" Kerf, 4 Tooth Chipper
Shim Set
Carrying Case | |
|
 |
|
|
|
%%SoftCart.product(FORRDK06244).Stock%%
PART#: DK06244
COST: $%%product(FORRDK06244).Price%% |
24 tooth, 5/8" arbor hole. No tearout when grooving across soft wood, hard wood, oak and birch ply veneer or melamine.
Negative hook and scoring action of outside blades make perfect edged grooves with flat, square bottoms.
Rip, cross-cut, and miter at any depth. #C-4 carbide tips on all trim and chipper blades.
Dado up to 29/32" wide in 1/32" increments.
Includes:
Two 24 tooth, carbide-tipped saw blades.
Four 1/8" kerf, 4 tooth chippers.
One 1/16" kerf, 4 tooth chipper.
One 3/32" kerf, 4 tooth chipper.
Two each of .010, .012, .015 magenetic shims.
Blade Runner plastic carrying case. | |
|
8" DADO BLADES |
|
 |
|
|
|
|
%%SoftCart.product(FREUSD208).Stock%%
PART#: SD208
COST: $%%product(FREUSD208).Price%% |
12 teeth, 20° top bevel, -12° hook, 5/8" arbor.
Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
Includes:
Two 24 Tooth, Carbide-Tipped Saw Blades
Four 1/8" Kerf, 4 Tooth Chippers
One 1/16" Kerf, 4 Tooth Chipper
Shim Set
Carrying Case | |
|
|
|
|
%%SoftCart.product(AMAN658030).Stock%%
PART#:
COST: $%%product(AMAN658030).Price%% |
24 ATB & flat tooth, 5/8" arbor hole. Cut grooves from 1/8" to 13/16" wide.
Outside blades are hollow-ground for proper clearance and alternate top bevel grind with every sixth tooth flat ground.
Includes:
Two 24 tooth, carbide-tipped saw blades.
One 1/4" kerf chippers.
Two 1/8" kerf chippers.
One 1/16" kerf chipper.
Shim Set
Plastic carrying case. | |
|
|
|
|
%%SoftCart.product(AMAN658040).Stock%%
PART#: 658040
COST: $%%product(AMAN658040).Price%% |
46 ATB & flat tooth, 5/8" arbor hole. Cut grooves from 1/8" to 13/16" wide.
Outside blades are hollow-ground for proper clearance and alternate top bevel grind with every sixth tooth flat ground.
Includes:
Two 46 tooth, carbide-tipped saw blades.
One 1/4" kerf chippers.
Two 1/8" kerf chippers.
One 1/16" kerf chipper.
Shim Set
Plastic carrying case. | |
 |
|
|
|
|
%%SoftCart.product(FREUSD508).Stock%%
PART#: SD508
COST: $%%product(FREUSD508).Price%% |
24 teeth, 20° top bevel, -12° hook, 5/8" arbor.
Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
Includes:
Two 24 Tooth, Carbide-Tipped Saw Blades
Four 1/8" Kerf, 4 Tooth Chippers
One 3/32" Kerf, 4 Tooth Chipper
One 1/16" Kerf, 4 Tooth Chipper
Shim Set
Carrying Case | |
|
|
|
|
|
%%SoftCart.product(FORRDK08244).Stock%%
PART#: DK08244
COST: $%%product(FORRDK08244).Price%% |
24 tooth, 5/8" arbor hole. No tearout when grooving across soft wood, hard wood, oak and birch ply veneer or melamine.
Negative hook and scoring action of outside blades make perfect edged grooves with flat, square bottoms.
Rip, cross-cut, and miter at any depth. #C-4 carbide tips on all trim and chipper blades.
Dado up to 29/32" wide in 1/32" increments.
Includes:
Two 24 tooth, carbide-tipped saw blades.
Four 1/8" kerf, 4 tooth chippers.
One 1/16" kerf, 4 tooth chipper.
One 3/32" kerf, 4 tooth chipper.
Two each of .010, .012, .015 magenetic shims.
Blade Runner plastic carrying case. | |
|
