Circular Saw Blades

3-3/8" Plywood Saw Blade

by Makita

50 tooth, 0.031" kerf, 15mm arbor. Plywood blade for smooth, splinter-free cuts in thin plywood and plastics.

3-3/8" Combination Saw Blade

by Makita

50 tooth, 0.046" kerf, 15mm arbor. For fast and smooth rips, cross-cuts, and miters.

4-3/8" Combination Saw Blade

by Makita

50 tooth, 0.046" kerf, 20mm arbor. General-purpose blade for fast and smooth rip, cross-cuts and miters.

4-3/8" Premium Combination Saw Blade

by Matsushita

30 tooth, carbide-tipped, 1/16" kerf, 20mm arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping. Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering. This blade is rated great for miter box saws.

4-1/2" Riptide Saw Blade

by Porter-Cable

20 tooth, carbide-tipped, thin kerf, 3/8" arbor. For fast and smooth rip cuts.

6-1/2" Premium Combination Blade

by Matsushita

36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping. Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering. This blade is rated great for miter box saws.

7-1/4" Diablo Framing Saw Blade

by Freud Saw Blades

24 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor.

10-1/4" Endurance Ripping / Cross-Cut Saw Blade

by Milwaukee

28 tooth, carbide-tipped, 0.122" kerf, 5/8" arbor. All-purpose blade for ripping and cross-cuts.

16-5/16" Carbide-Tipped Blade

by Makita

60 tooth, carbide-tipped, 0.109" kerf, 25mm arbor. All-purpose blade for fast and smooth rip, cross-cuts and miters.

7-1/4" Steel-Pro Saw Blade

by Tenryu

48 tooth, carbide-tipped, 5/8" arbor. For use in cutting "mild" unhardened, ferrous metal. Good for cutting steel studs, steel pipe, sheet steel, channel and other mild steel.

8" Metal Cutting Circular Saw Blade

by Milwaukee

42 tooth, carbide-tipped, 0.073" kerf, 5/8" arbor. Use for general purpose cutting of ferrous and non-ferrous metals. Cuts over 3/32" thickness. For use with the Milwaukee 6370-21 8" Metal Cutting Saw Kit.

3-3/8" Wet / Dry Cutting Diamond Blade

by Makita

15mm arbor. For general purpose wet / dry cutting in stone and masonry.

4" Continuous Rim Tile Diamond Blade

by Parsons

Dry / Wet Cutting. Ideal for ceramic tile. 7/8" arbor hole. Includes a 5/8" and 20mm reducing bushing.

7-1/4" HardiPlank / Fiber Cement Saw Blade

by Hitachi

4 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).