7-1/4" Circular Saw Blades

For use with 7-1/4" diameter, 5/8" arbor circular saws.

CIRCULAR SAW BLADE INDEX

WOOD BLADES METAL BLADES HARDIPLANK BLADES

Wood Circular Saw Blades

7-1/4" Ultra-Coated Framing Blade

by Makita

PART#: A-94530
COST: $8.95

24 tooth, 15° hook, 0.071" kerf, 5/8" arbor. The Makita A-94530 7-1/4-inch Black Framing Blade has an exclusive tooth configuration that cuts faster, cleaner and lasts longer than traditional blades.

Freud Diablo Series D0724A Saw Blade

7-1/4" Diablo Framing Saw Blade

by Freud Saw Blades

PART#: D0724A
COST: $9.97

24 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor.

Freud Diablo Series D0740A Saw Blade

7-1/4" Diablo Smooth Finish Saw Blade

by Freud Saw Blades

PART#: D0740A
COST: $14.97

40 tooth ATB, 15° hook, 0.059" kerf, 5/8" arbor.

Makita 721251-A Fine Cross-Cut Saw Blade

7-1/4" Fine Cross-Cut Saw Blade

by Makita

PART#: 721251-A
COST: $22.50

40 tooth, carbide-tipped, 0.073" kerf, 5/8" arbor. For sand-free cutting cleanly against the grain. Alternate top bevel tooth configuration for wood. Fully hardened thin kerf body design.

Matsushita MS71436CB Premium Combination Saw Blade

7-1/4" Premium Combination Saw Blade

by Matsushita

PART#: MS71436CB
COST: $27.50

36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor. Primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Not recommended where more than 10% of the work is ripping. Teeth are top beveled and face beveled. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering. This blade is rated great for miter box saws.

Metal Circular Saw Blades

7-1/4" Steel-Pro Saw Blade

by Tenryu

PART#: PRF-18548
COST: $45.00

48 tooth, carbide-tipped, 5/8" arbor. For use in cutting "mild" unhardened, ferrous metal. Good for cutting steel studs, steel pipe, sheet steel, channel and other mild steel.

MATSUSHITA 60T BLADE

7-1/4" Premium Aluminum / Plastic Saw Blade

by Matsushita

PART#: MS71460AP
COST: $65.00

60 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor. Used for aluminum and other non-ferrous metals, particle board and extra hard woods. This blade can take the RPM of miter box saws.

HardiPlank Circular Saw Blades

Hitachi 18008 HardiPlank Saw Blade

7-1/4" HardiPlank / Fiber Cement Saw Blade

by Hitachi

PART#: 18008
COST: $45.00

4 tooth, diamond-tipped, 5/8" arbor. Fiber cement siding and board ripping and crosscutting. Designed for use with James Hardie siding products (Hardi Plank & Hardi Board).

Hot Tool Deals!!!

9

9" Diablo Demo Demon Reciprocating Saw Blade 2 Pack Special

Two for the Price of One!

PART#: DS0906CWP
COST: $9.95

The Diablo Demo Demon Reciprocating Blades are specifically designed for maximum performance in nail-embedded wood. This 6 TPI high performance carbide tipped blade delivers 10X longer cutting life.

See LARGER IMAGE

Bosch Knife

Retractable Knife

PART#: H290B
COST: $12.95

Includes pouch.

See LARGER IMAGE

CH Hanson 03040 Magnetic Stud Finder

PART#: 03040
COST: $7.95

The 03040 Magnetic Stud Finder positively locates screws and steel studs with powerful rare earth magnets.

See LARGER IMAGE , MORE INFO

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $19.95

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.

See LARGER IMAGE , MORE INFO

100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.

See LARGER IMAGE , MORE INFO

SHOPPING INFORMATION

SUBTOTAL: $9.97

SHIPPING CALCULATOR
Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

PRODUCT NUMBER PRODUCT QUANTITY UNIT PRICE TOTAL
FREUD0724A 7-1/4 24T BLADE 1 $9.97 $9.97
Subtotal $9.97
Coastal Tool - Discount Power Tools & Hand Tools nsession