Matsushita Saw Blades

The highest quality tungsten carbide, thin kerf blades.

  • Hand-tensioned and balanced.
  • C-9 carbide teeth with 54 rockwell hardness plate for excellent durability.
  • Unique three-step grinding process to bevel the top and face of the tooth.
  • Fast, smooth cuts with less drag and minimal waste with little, if any tearing, chipping, or feathering of the cut stock.

Matsushita Wood Combination Saw Blades

These Matsushita saw blades are primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Teeth are top beveled and face beveled. Not recommended where more than 10% of the work is ripping. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering. This blade is rated great for miter box saws.

Matsushita MS33820CB Saw Blade

3-3/8" Premium Combination Saw Blade

PART#: MS33820CB
COST: $27.50

20 tooth, carbide-tipped, 1/16" kerf, 15mm arbor.

Matsushita MS43830CB Saw Blade

4-3/8" Premium Combination Blade

PART#: MS43830CB
COST: $27.50

30 tooth, carbide-tipped, 1/16" kerf, 20mm arbor.

Matsushita MS41230CB Saw Blade

4-1/2" Premium Combination Blade

PART#: MS41230CB
COST: $27.50

30 tooth, carbide-tipped, 1/16" kerf, 3/8" arbor.

Matsushita MS51236CB Saw Blade

5-1/2" Premium Combination Blade

PART#: MS51236CB
COST: $27.50

36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor.

6" Premium Combination Blade

PART#: MS60036CB
COST: $27.50

36 tooth, carbide-tipped, 1/16" kerf, 1/2" universal arbor.

Matsushita MS61236CB Saw Blade

6-1/2" Premium Combination Blade

PART#: MS61236CB
COST: $27.50

36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor.

Matsushita MS71436CB Saw Blade

7-1/4" Premium Combination Blade

PART#: MS71436CB
COST: $27.50

36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor.

Matsushita MS81440CB Saw Blade

8-1/4" Premium Combination Blade

PART#: MS81440CB
COST: $69.00

40 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor.

Matsushita MS10060CB Saw Blade

10" Premium Combination Blade

PART#: MS10060CB
COST: $89.00

60 tooth, carbide-tipped, 3/32" kerf, 5/8" arbor.

Matsushita Wood Crosscut Saw Blades

For use on all woods for cutting cross grain. Not recommended beyond minimal ripping. They can be used for ripping but material must be fed slower to avoid overloading. The cross-cut style is excellent for miter box saws.

Matsushita MS81260CC Saw Blade

8-1/2" Ultra Cross-Cut Blade

PART#: MS81260CC
COST: $75.00

60 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor.

Matsushita Metal Saw Blades

Excellent blades for saving material while assuming a non-chip, non-feathered edge. Use these blades on non-ferrous metal, plastics and hard hardwoods. These blades take RPM of mitre box saws.

Matsushita 60T Saw Blade

7-1/4" Premium Aluminum / Plastic Saw Blade

PART#: MS71460AP
COST: $65.00

60 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor.

Hot Tool Deals!!!

9

9" Diablo Demo Demon Reciprocating Saw Blade 2 Pack Special

Two for the Price of One!

PART#: DS0906CWP
COST: $9.95

The Diablo Demo Demon Reciprocating Blades are specifically designed for maximum performance in nail-embedded wood. This 6 TPI high performance carbide tipped blade delivers 10X longer cutting life.

See LARGER IMAGE

Bosch Knife

Retractable Knife

PART#: H290B
COST: $12.95

Includes pouch.

See LARGER IMAGE

CH Hanson 03040 Magnetic Stud Finder

PART#: 03040
COST: $7.95

The 03040 Magnetic Stud Finder positively locates screws and steel studs with powerful rare earth magnets.

See LARGER IMAGE , MORE INFO

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $19.95

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.

See LARGER IMAGE , MORE INFO

100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.

See LARGER IMAGE , MORE INFO

SHOPPING INFORMATION

SUBTOTAL: $27.50

SHIPPING CALCULATOR
Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

PRODUCT NUMBER PRODUCT QUANTITY UNIT PRICE TOTAL
MATSMS61236CB 6 1/2" 36T CARB THIN KERF BLADE 1 $27.50 $27.50
Subtotal $27.50
Coastal Tool - Discount Power Tools & Hand Tools nsession