Matsushita Saw Blades
The highest quality tungsten carbide, thin kerf blades.
- Hand-tensioned and balanced.
- C-9 carbide teeth with 54 rockwell hardness plate for excellent durability.
- Unique three-step grinding process to bevel the top and face of the tooth.
- Fast, smooth cuts with less drag and minimal waste with little, if any tearing, chipping, or feathering of the cut stock.
MATSUSHITA BLADE INDEX
| WOOD COMBINATION WOOD CROSSCUT | METAL CUTTING |
Matsushita Wood Combination Saw Blades
These Matsushita saw blades are primarily designed for cutting cross grain in soft and medium hardwoods and plywoods. Teeth are top beveled and face beveled. Not recommended where more than 10% of the work is ripping. As the top of the tooth cuts the fiber, the face is planing for smoothness with little, if any tear, chipping or feathering. This blade is rated great for miter box saws.
3-3/8" Premium Combination Saw Blade
COST: $19.50
20 tooth, carbide-tipped, 1/16" kerf, 15mm arbor.
4-3/8" Premium Combination Blade
COST: $19.50
30 tooth, carbide-tipped, 1/16" kerf, 20mm arbor.
4-1/2" Premium Combination Blade
COST: $19.50
30 tooth, carbide-tipped, 1/16" kerf, 3/8" arbor.
5-1/2" Premium Combination Blade
COST: $19.50
36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor.
6-1/2" Premium Combination Blade
COST: $19.50
36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor.
7-1/4" Premium Combination Blade
COST: $19.50
36 tooth, carbide-tipped, 1/16" kerf, 5/8" arbor.
8-1/4" Premium Combination Blade
COST: $55.00
40 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor.
10" Premium Combination Blade
COST: $69.00
60 tooth, carbide-tipped, 3/32" kerf, 5/8" arbor.
Matsushita Wood Crosscut Saw Blades
For use on all woods for cutting cross grain. Not recommended beyond minimal ripping. They can be used for ripping but material must be fed slower to avoid overloading. The cross-cut style is excellent for miter box saws.
8-1/2" Ultra Cross-Cut Blade
COST: $69.00
60 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor.
Matsushita Metal Saw Blades
Excellent blades for saving material while assuming a non-chip, non-feathered edge. Use these blades on non-ferrous metal, plastics and hard hardwoods. These blades take RPM of mitre box saws.
7-1/4" Premium Aluminum / Plastic Saw Blade
COST: $45.00
60 tooth, carbide-tipped, 5/64" kerf, 5/8" arbor.
