Kreg Pocket Hole Jig Accessories
3/8" Step Drill Bit
COST: $%%product(KREGKJD).Price%%
The bit used to drill the pocket holes forms a flat bottomed pocket and screw guide hole in one operation. The guide hole helps align the screw so that it exits directly in the center of the work piece while the flat bottom of the pocket ensures that the screw head has a flat surface to grip.
3" & 6" Drivers
COST: $%%product(KREGDDS).Price%%
Includes both a 6" and 3" square nut driver.
Depth Collar
COST: $%%product(KREGKJSC/D).Price%%
An adjustment guide attached to the drill bit and helps set the proper hole depth in standard 1/2", 3/4", and 11/2" thick material.
Right Angle Clamp
COST: $%%product(KREGRAC).Price%%
The right angle clamp helps to align workpieces in 90 degree registration. The clamp is designed with a 3/8" steel pin on one arm that fits down into the pocket hole and anchors the workpiece firmly against the second workpiece to be joined. The opposite arm is fitted with a 180 swiveling pad that automatically adjusts to your material dimensions. Finish the joint by driving a screw into the adjacent pocket hole. Also great for assembling all types of box joints.
Face clamps insure a flush joint every time. Without clamping the joint can mis-align if the screw follows the grain, but face clamps keep the work pieces in alignment regardless of the screw's trajectory. For flat stock, such as face frames, mitered picture frames and other similar joints the face clamp is a fast and simple solution. The clamp's large pad also keeps the clamp from marring the wood.


